DK 4 layer - no sound

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
This is a long shot, don't know if anyone on here has a proper DK cocktail cab?

(Maybe Morgym has a 4 layer pcb?)

I have just received a Donkey Kong 4 layer pcb and am using it in my upright Dk Jr cab.

The game works fine, but I have no sound at all. I know the sound amp works because when I play Jr, it is fine.

I have a hunch that the DK 4 layer pcb may need some external power to the sound board from the psu (marke p7 sou) Is this correct?

The 4 layer pcb has rainbow cables where they should be connecting the boards together, but nothing in the 7 pin plug next to the sound connector on the sound board, which leads me to think that this goes to the unused 7 pin connector on my psu.

If so, where could I get a cable from?
 

morgym

Newbie
Credits
12CR
Yeah you're right the sound board does take its own powersupply, iv swapped out my 4 board for the 2 board and that 7 pin cable is redundant. Not sure about how to find a replacement , mikes arcade? Maybe some off the other guys on here can help
 

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
..or sell me yours?
smiley36.gif


I have asked a chap in the US about one (I am off to Vegas/LA/SF next week on holiday)

virtvic2012-12-18 22:25:53
 

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
I may even just patch some of the other voltage wires to the sound board. Or - I may just get some connectors from Mikes Arcade and do it properly...
 
Top