Dragons lair

Retroruss

Active member
Credits
95CR
OMG....
It must be something simple, LDP works ok, disc ok, board and rooms seem ok, monitor ok, controls ok....

If I unplug the control cable from the hi tech board to the LDP the LDP players the disc through to the end.

As soon as plug the thing back in I get nothing on the screen, if I hit the 1player button the score board registers as if I have credits and starts scoring but nothing on the screen and no in game sound apart from the correct/incorrect joystick beeps.
 

Dex-Jay

Active member
Feedback
4 (100%)
Credits
375CR
Sound like something simple to me.... is the Hi Tech board illuminated OK?
If so it does sound like a connection problem, disturbed anything on it lately?

I've done stuff as stupid and simple as putting the coms pin connector on the original board the wrong way round or not used a non-null modem cable connector in error.

Haven't touched the dips switches either have you?

Pretty much it will be something silly that you'll be looking for, for an hour and sort in seconds!
 

Bods

Senior Member
vacBacker
Feedback
5 (100%)
Credits
5,410CR
sounds like my mad dog

unplug the cable to the laser player on that and the disc plays though with picture on the monitor, connect the cable from the amiga which goes through some other stuff and i get abit of a picture but the disc wont play or something like that, must have pics somewhere. I think the Genlock for on screen gfx is faulty, which is what I was originally told

Is yours Atari one of the other
 

Retroruss

Active member
Credits
95CR
No mate its a US cinimatronics cab, I had it shipped over.

Don't know much about electronics unfortunately and this is doing my head in.
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
I don't think Dragon's Lair games are easy to fix, or maintain
smiley18.gif


I hope you get it working 100% bud
 

Dex-Jay

Active member
Feedback
4 (100%)
Credits
375CR
With a decent player, they're a lot better than when they left the factory! Not a problem to maintain if they're left alone!

Using a Lasermax I presume? If the original board is doing all the right beeps, the card is working correctly, the dip switches on the player are correct (for the Sony), the player is good, the disc is good then it WILL be a communication problem due to cables.

Double check the connections and if you damaged the ribbon cable for the DL board, get another.

Let us know how it works out!!

Rich
 
Top