ebay chip burners

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
never used on but for £19 its not bad

it wont do 16 bit EPROMS though

DC to DC step up voltage converter most prob

having said that my programmer doesn't complain using USB 5V to program 2716 which also need 25V

EDIT: just noticed the £10 postage charge

Walk away for £30 you can get a Minipro and thats far better programmersilverfox07862015-03-03 22:09:31
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
I bought a minipro to program GAL chips, it's turned out a be a very capable bit of kit for the money, and seems to handle more chip types than my more expensive programmer.
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
muddymusic said:
I bought a minipro to program GAL chips, it's turned out a be a very capable bit of kit for the money, and seems to handle more chip types than my more expensive programmer.

I love my minipro its so bullet proof

If Mini pro made more programmer that supported wider than 40 pins I would jump and buy on in an instance

I have had a GQ-4X and

own a TOP 3100 and it only gets used when the mini pro cant be used
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
slowcade said:
Is this the Minipro that you are referring to?
http://m.ebay.com/itm/321475265484
Yes, I got mine for £27.50 delivered from ebay, had to say no at that sort of price. It has no option for external power but has coped with everything I've asked of it so far.
I also have a GQ-4X with an adapter board for anything the minipro won't do.
 

slowcade

Active member
Feedback
1 (100%)
Credits
204CR
muddymusic said:
Yes, I got mine for £27.50 delivered from ebay, had to say no at that sort of price. It has no option for external power but has coped with everything I've asked of it so far.
I also have a GQ-4X with an adapter board for anything the minipro won't do.

ah, thanks.
smiley1.gif
Maybe I'll give it a go at that price.
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
I've got a TL866A USB MiniPro and if works just fine in my Win 7 64-bit VM.

Great little chip programmer. If only it could do bipolar PROMs it'd be the best thing since sliced bread!
 

t-m

Active member
vacBacker
Feedback
2 (100%)
Credits
333CR
Biggest problem with those Willem programmers is they need a parallel port on your PC which is rare these days, the USB is only for power. I did use one for a while connected to an old laptop but it was pretty unreliable.
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
Anyone had any luck reading older, slower EPROMs with the TL866CS/A?

Mine just arrived today (TL866CS) and reading a couple of SGS M2716 EPROMs that were hanging around my desk, the TL866CS give different reading and checksums on every read
smiley5.gif


I've looked for a speed setting in the software to try and slow down the read speed, but nothing obvious and the G540 writes and reads these no problems

Aside:

BTW you can convert the TL866CS to be a TL866A compatible using the following run through

http://blackstufflabs.com/2013/11/18/conversione-programmatore-tl866cs-a-tl866a/?lang=en

and there's a GUI out there there for the Open Source programming version on Linux (as well as an Amiga port madly!)

http://www.drdobbs.com/embedded-systems/oooh-that-usb-smell/240168296

and a compatibility shim for the Windows version on Linux

https://github.com/radiomanV/TL866
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
I've found with mine that I sometimes need to boost the verify Vcc voltage from the default 5v to 5.5v to get reliable reads on older eproms.
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
silverfox0786 said:
2716 wont work with teh Minipro

they require 25V adn the minipro max is 21V

Sarj - 25V just to READ the damn EPROMs - really!?!?
smiley36.gif


(I know you mean 25V to PROGRAM, really, but I hadn't even got that far...)

BTW it does list it as a compatible chip so surely a good, honest, Chinese cheap chip burner should honour it's promises?
smiley2.gif
 
Top