EEPROM Programmer

Feedback
1 (100%)
Credits
86CR
Hi after a bit of advice.
I'm looking to get in to PCB repair, have a few here that I'd like to flash ROMs for.
Also have a MVS that I want to flash a universe bios for.

Any suggestions on a programmer?
I already have a pic programmer pickit 3, but I'm guessing this is limited to pic only not eeprom.
 

joe34

Active member
Credits
448CR
TL866II Plus is really good and if not in a particular hurry to receive it, its much cheaper getting them on aliexpress rather than eg. ebay uk
 
Feedback
1 (100%)
Credits
86CR
Thanks both.
Is the following suitable? Looked at them on AliExpress around the same price or more but with a lot more connectors (not sure I need them all).

https://www.ebay.co.uk/itm/HIGH-PERFORMANCE-TL866II-Mini-Pro-USB-Universal-Nand-Spi-Eeprom-Programmer-Ku-/263533947544?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
 

joe34

Active member
Credits
448CR
i think thats the one i got yes, make sure u do get the the II+ (plus) model as its newer with better features etc
 

penrhos

Active member
Feedback
23 (100%)
Credits
747CR
I've got a tl866 and a dataman 48 Pro and can do all the chips I want to burn.

I have a GQ-4X and rarely use it as it can't do pic chips and a couple the 866 can.

If you want a cheap programmer to do modern chips the tl866 will be fine (provided you can find a legit one) but don't expect it to cope with some of the old 12V eproms.

Those cheap Chinese eprom erasers work OK.

Finding decent eproms is getting hard - so many fakes and re-labelled ones on ebay....penrhos2021-10-29 09:21:10
 

bones

Active member
Feedback
15 (100%)
Credits
1,628CR
New to this myself,but I managed to program a 2716 for my Taito field goal using a tl866 plus by Xgecu which I didn't think it was supposed to be able to do. Also managed to read a 82s123 prom by wiring into a 2716 socket using a breadboard and plenty of link wires
smiley32.gif
smiley4.gif
.
 

TheDaddy

Senior Member
vacBacker
Feedback
14 (93%)
Credits
7,230CR
You can read 16's but you wont beable to write them I dont think. This is due to amperage issues with USB.

As said above be carefull of knock offs , The TL866 II was not being copied a few years back , sure it is now though.

Dave.
 

neoretro

Active member
Feedback
11 (100%)
Credits
1,121CR
Hi All,

Looking to get a legit one myself but seems about 100 different types and brands on Amazon.

One thing I couldn’t work out is whether these work on Macs? Does anyone know?
 

NivagSwerdna

Active member
Feedback
1 (100%)
Credits
855CR
neoretro said:
looking to get a legit one myself but seems about 100 different types and brands on Amazon.
I bought mine, several years ago, from EBAY in a bundle with many adapters (it's actually quite clever how it adapts to larger chips) and even though all the markings suggest it is genuine the software still complains but works fine. I think finding a 'genuine' one is probably impossible and not worth it... just buy one at a reasonable price with the bits you need.
Caveat Emptor though... this won't work for old chips... Bipolar PROMs, 25V UV EPROMs etc.. not out of the box anyway.
 

TheDaddy

Senior Member
vacBacker
Feedback
14 (93%)
Credits
7,230CR
I purchased the TL866 and discovered it was a fake when I tried to update the firmware and it bricked it. The guy I purchased it off insisted it was legit but I had all of the info and pictures to prove otherwise. He sent me a TL866 Plus in its place (It was an ebay purchased and 10 months after purchase so I was surprised i got anything to be fair ! ). I did read up and at the time ( 18 months or so ago ) no one had reproduced the plus one. No doubt they have done now though.

Dave.

TheDaddy2021-12-16 10:25:48
 
Top