Fan. Push or pull???

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Another silly question.

Trying to keep an ar3 cool in my system 2 cab so question is do you pull the heat away from the ar3 or blow cool air over it and up onto the pcb stack above?

The original fan was missing so what's the best method? The ar3 gets very hot but the switcher for the top pcb is nice and cool running.

Thanks
 

Mykill

Active member
Feedback
1 (100%)
Credits
229CR
Every ones enjoys a good blow,I asked this a wile ago as I've fans in all my cabs was told it doesn't realy matter I always felt blowing into the cab worked better ,I'd go a silent fan some can hum a bit
 
Top