Hi chaps,
Currently replacing the flyback on an Electrohome g07 and whilst I can get the pins in place with slight bending, once tightening it with the screws to the chassis, it becomes a problem with flexing etc.
I found a post on the system 11 blog about this so have bolted it to the chassis first then soldered it in but curious about it not sitting flush to the pcb now.
Am I safe to turn the thing on, could there be a possibility of damage, shorts across pins etc.
Cheers,
Mike
Currently replacing the flyback on an Electrohome g07 and whilst I can get the pins in place with slight bending, once tightening it with the screws to the chassis, it becomes a problem with flexing etc.
I found a post on the system 11 blog about this so have bolted it to the chassis first then soldered it in but curious about it not sitting flush to the pcb now.
Am I safe to turn the thing on, could there be a possibility of damage, shorts across pins etc.
Cheers,
Mike