hi all.
As the title suggests, i have a Philips PM3215 Dual Trace 50mhz
Oscilloscope that i want to shift on. I already have a nice one, this
was always just kept as a spare. Its sat around for several years now
and hasn't been used, so i think its time to move it on to someone
that can make use of it. I tested it out again and i can find no
problem with it, as good as always.
It comes with 2x PM8935/40 10:1 probes, you can buy some plain probes
off of ebay if you wanted, but these work just fine. It comes with a
proper padded carrycase too. The carrying handle has been removed,
this was because i wanted it to fit on my bench, all the parts are
there to re-attach it if you wanted, but the handle i find just gets
in the way. I even have the original manuals for it, but i seem to
have lost those at the moment, when i find them, i will post them to
the buyer free of charge. This scope has a backlit grid display which
is a neat feature, but it has all the sorts of functions no arcade
tinkerer should be without, it also has a Z-Mod input on the rear of
the unit.
I'm looking for £100 for this little beauty, a bargain if i do say so
myself, go look on ebay at the sort of price you'll pay for a similar
spec model.
Please take a look at all the photos that you can find here :
http://www.andysarcade.net/scope/
Item is heavy (about 10kg), and fragile, I don't want to post it, i
would like the new owner to come and pick it up, or arrange for it to
be collected by your own courier unless someone can suggest a decent
carrier?...
email me off-list if interested, thanks.
--
Andrew Welburn
http://www.andys-arcade.com/
__._,_.___
Messages in this topic (1) Reply (via web post) | Start a new topic
As the title suggests, i have a Philips PM3215 Dual Trace 50mhz
Oscilloscope that i want to shift on. I already have a nice one, this
was always just kept as a spare. Its sat around for several years now
and hasn't been used, so i think its time to move it on to someone
that can make use of it. I tested it out again and i can find no
problem with it, as good as always.
It comes with 2x PM8935/40 10:1 probes, you can buy some plain probes
off of ebay if you wanted, but these work just fine. It comes with a
proper padded carrycase too. The carrying handle has been removed,
this was because i wanted it to fit on my bench, all the parts are
there to re-attach it if you wanted, but the handle i find just gets
in the way. I even have the original manuals for it, but i seem to
have lost those at the moment, when i find them, i will post them to
the buyer free of charge. This scope has a backlit grid display which
is a neat feature, but it has all the sorts of functions no arcade
tinkerer should be without, it also has a Z-Mod input on the rear of
the unit.
I'm looking for £100 for this little beauty, a bargain if i do say so
myself, go look on ebay at the sort of price you'll pay for a similar
spec model.
Please take a look at all the photos that you can find here :
http://www.andysarcade.net/scope/
Item is heavy (about 10kg), and fragile, I don't want to post it, i
would like the new owner to come and pick it up, or arrange for it to
be collected by your own courier unless someone can suggest a decent
carrier?...
email me off-list if interested, thanks.
--
Andrew Welburn
http://www.andys-arcade.com/
__._,_.___
Messages in this topic (1) Reply (via web post) | Start a new topic