GALAGA - some sync problem

veli

Newbie
Credits
2CR
Game: Galaga original Midway PCB's

Monitors: SAMSUNG CRT and FUJITSU SIEMENS LCD

Convertor: CGA to VGA - GBS 8200

Problem: Game itself running fine on standard CGA arcade monitor. Also GBS 8200 converter works fine (for example with NEOGEO) on CRT and also LCD. But when i use converter with Galaga there is following problem: image is ok in horizontal scan but it shakes a lot and fast in vertical scan. Iam beginner in english so I can find right words-sorry for that. Screen in game itself is ok (i mean that all the game vertical move is fine. Ships, enemies, etc.) . In other words: game is playing vertical normally but all the screen is shaking.

I tried to move grey wire on GBS 8200 input by one position. Also try to use vertical input and horizontal input both at same time. But it is also same.

Anyone have some ideas what to try? ;) it is not problem for me to make some electronic circuit, soldering, using various meters, etc . Also I build one arcade machine machine (Mortal Kombat II) from scratch. So it could be more technical solution.

Thanks for every reply.

galaga_sync_problem.jpg
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Hi Veli,

Welcome to the forum! Is there any chance of taking a quick picture of the converter? A lot of these CGA to VGA boards are around now and many are the same thing with different names so a picture will help a lot of us to know which converter board you have.

What is it that you are trying to do? I ask because my initial reaction is that if the converter is the one that I know, the answer is that it can just be picky some times with certain games and sometimes you just have to accept that it doesn't work for all games. So, my answer would be that if it works ok on the CGA arcade monitor, stick to that!! Obviously you're trying to do this for some reason though so help us understand why, then we can see how we can help.

If I had the Galaga PCB on the bench and the converter on the bench, and I'd already checked my connections (we can get to that when we know what converter it is) I'd be thinking about connecting up the sync signals to a scope and seeing what they looked like. How clean they are, what exact timing and so on, but thats really getting ahead of ourselves...

Martin.
 

veli

Newbie
Credits
2CR
CGA monitor that i tested is used in my Mortal Kombat II cabinet. This monitor is 26" so it is still too big to fit in my Galaga cabinet. And I have no other CGA monitor. Galaga cabinet was without monitor. So now I don't know what to do. Buying new CGA monitor is not an option for me because shipping very, very expensive and I don't have enough money for that. I think some type of professional CGA to VGA converter can work without problems but these pro. converters are also very expensive.

I tried use both input (red rectangles) and also tried to "play" with sync inputs (yellow rectangle)

P.S.: I forgot to say that I also try AUTO button, different resolution and try to modifying every parameter of converter but with no success.

Result is always same without any change.

gbs8200-popis.jpg
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
Hi veli, I've had similar experience with the GBS 8200 as you. I can't get it to work at all with older games (anything 80's/90's Atari for instance). The only game I got it to work with was a Sega STV board. I even tried using on of JROK's sync cleaner circuits but it didn't help. I think the GBS 8200 (and it's many variants/copies) are a great idea, it's just a shame that it doesn't work! I'm looking around for an alternative that isn't based on this hardware, if I ever find one (that's affordable) I'll post back here.

Dan
 

virtvic

The Cabaret King
Feedback
21 (96%)
Credits
2,012CR
I've had varying success / failure with one of these.

Karate champ seems to work well, as does Mr. Driller, but Bosconian seems to be a very small picture and whatever you do, you can't adjust it out???
 

G-man

Active member
Feedback
3 (100%)
Credits
181CR
That board is similar but not the same as the one I have. Mine has two VGA outputs and a (slightly) different layout.

I've tested it with older pcb's and it works fine (Bombjack, Mr Do and it's variations etc) but I dont have a Galaga to test on it. I know people who have these pcbs and have had some weird problems with them, even on newer games.

I'll check the model number of the one I have.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Sounds like I've got the same one as G-Man. Mine has 2 VGA outs and is an 8220. Mine is also a considerably older board. It's May 2009 whereas that one is December 2010. Although I would have though they would only have got the software better with age. Maybe, as Oll says, it's the Galaga board?

There's no substitute here really for looking at the sync signals with a good scope and seeing if they're out of spec at all. These boards are fussy as we all know.
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
Another vote for scoping the video. I had a Wie-Ya (possible bootleg of a Wei-Ya) upscanner which was incredibly picky about what it would sync to but it got to the point where I could look at a scope of the sync and tell whether it would work or not. If the scope view didn't look like a textbook example then the early rasters would warp, colour levels would shift for a number of scanlines and so on.

The DIP switches had absolutely no effect as far as I could tell :)
 

Mental

Newbie
Credits
9CR
Sorry to revive this old thread. I am experiencing an identical issue with a 1942 board, running through the same 8200 converter. There is a very bad vertical screen shake.

Just wondering if you ever came up with a solution?
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Presumably not. We all suggested that the original poster scoped out the sync signals to see what they were like but we never had a response on the subject so were never able to assist further.

And on top of that, sadly, P-Man is right in saying that any of these cheap VGA upscanners / converters are notoriously crap when it comes to old boards.
 

dazza1

Active member
Feedback
1 (100%)
Credits
56CR
hi there,
i have one of these and it works great for galaga blue bootleg board.

on the GBS- 8200 menu you need to change a couple of things in the menu,set clamp st to 03 and then set clamp sp to 04.
this should stable the image

hope it works out
darryl
 

Mental

Newbie
Credits
9CR
Thanks again to dazza for the tips. I actually managed to get the shaking to stop once (and only once) by turning the voltage down all the way. The screen dimmed a little, but no more shaking! I'm going to try a new (better quality) power supply and see if it solves the issue.
 
Top