Gorf cage

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
After weeks of working all hours and working on my extension, I've had a bit of free time this week to work on my broken gorf. So far I know the monitor is working and the sound crackles when moving the volume, but no game booting up. I've check the voltages going into the cage and on the power board, replaced a couple of roms and cleaned up the legs, fixed a couple of dry joints on the rom board, replaced connectors. The custom has a heatsink, I hope it's good. I was going to check the 8 2114 rams on the rom board as they are in sockets but I have no way to test them. Can anyone recommend some hardware to test them? Maybe I can use one of my zx81's, but Id rather just have a proper ram tester. Anyone local (Notts) with a gorf cab, so I can check my cage and swap the boards around?

I just want to play some gorf
smiley19.gif
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
Well I went back over my work and noticed that the 5v dropped to 0.75v out of both 5v lines (pin 18,19) at the power suppy, when the cage was connected. Have I got a bad linear power supply? All my connections are new and good. Maybe them large caps are bad ?Shinydaz2016-11-13 06:31:18
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
For starters get rid of that linear supply and fit a switcher. If those linear fail they will kill your boardset!!!!
Rgp makes a nice repair kit for gorf machines.
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Thanks for the recommend Steve,

I can also fast test your cage as well against some known working ones.

After i've completed Steve's paperboy that is ... :)

Link to the shop is in my signature.
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
I've just ordered some stuff, thanks. I'll see how I get on after fitting the switcher. I do like to try and fix stuff myself, however Gorf seams a little tricker to work on and may require James' expertise and I'm far from an expert !Shinydaz2016-11-13 14:10:37
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
Switcher fitted, adapter connected up, voltages checked. Hopefully get the board put back in soon and then cross my fingers and toes.
IMG_20161119_4970.jpg
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Well done. That's the best picture I have ever seen on a gorf machine.

Very jealous as my picture is dull and red seems very dicky.....

Have fun
 

LAZORIAN

Active member
vacBacker
Feedback
2 (100%)
Credits
260CR
Awesome stuff Daz great job.
The background sound is missing so maybe you could look into that at some point. Speech is working though which is cool.
I agree the image is really nice!
Check the rank light bulbs first as it gets a bit warm round there and they blow. They should be easy enough to find.
I really want to get mine working now but things are a bit chaotic atm with games moving around.
Well done mate.
 

bud2

Newbie
Credits
24CR
Awesome mate !
makes me want to sort my picture issue out asap, but have to remember to only work on project at a time.( damn tempting ).
Think Iam going to swap out my power supply, did you grab the PSU from RGPs site?
:)
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
Yes I got the adapter from James at rpg, I already had a switcher. I managed to avoid hacking up the wiring to get power, by soldering a couple of additional wires to the transformer and cable tied them to the loom. I'm amazed after not being switched for 5 years, how great the monitor looks.
 
Top