Gorf voltages

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
So I pulled the pcb connectors off to see what the monitor would show after and I discover a green/black gunge on one of the pins.

IMG_20160905_56206.jpg
IMG_20160905_47610.jpg


Ran out of time today unfortunately to do any more.
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
Definitely !

Does anyone in the UK own one of these? I missed out on it by a few minutes or I'd have brought it, I'm sure it would have been beneficial to a few members on here.
IMG_20160906_15703.jpg
 

Hurray Banana

Moderator
Staff member
vacBacker
Feedback
8 (100%)
Credits
2,755CR

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Maaaaaan, if I had 48 hours a day, i'd still be behind on everything.
smiley4.gif


Especially with something else bubbling in the background at the moment.
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
Right I've ordered some stuff from RGP to try and get this thing going, no doubt I'll need more. I've had a spare hour tonight so I thought I'd pull out the pcbs and have a quick look. Nothing to obvious popped out to me apart from a maskrom the rom/ram board which has a jumper wire on it. This is a 2532 and all the others are 9332b's. I'm guessing this was just modified, probably due to whoever fixed it didn't have any 9332bs.

IMG_20160924_41685.jpg


I guess I will try and verify the roms, though I am struggling to find the correct setting on my minipro to read them.Shinydaz2016-09-24 04:34:56
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
Looks like I possibly have a couple of faulty roms, romident doesn't recognise gorf-d.bin and gorf-h.bin

Which eproms can I use to burn some new ones, I'm guessing I'll need some 2532's with a small jumper wire?
 

Shinydaz

Active member
vacBacker
Feedback
6 (100%)
Credits
814CR
A spare hour tonight, so I thought I'd check out the rom/ram board sockets and found this little rogue.

IMG_20160930_18488.jpg


Saturday night is date night with the soldering iron.
 
Top