Gunbird PCB control issue

DeusVult

User
Feedback
18 (100%)
Credits
26CR
I have a gunbird pcb, when powered up the controls seems to work fine for about 20 secs then stop responding altogether.

the board also has some glitches in the graphics but I assume this is a different issue to the controls?

is this something that could be fixed?
 

VectorGlow

Active member
vacBacker
Feedback
34 (100%)
Credits
900CR
Both issues are separate.

The control issue should indeed be fixable. The graphics glitches should also be fixable, the only possible fly in the ointment for both faults is if a custom chip is involved (quite possible with the graphics fault, far less likely with the controls fault).
 
Top