Hanterex chassis to tv tube

[Retroman839]

🙏😊🥰
It’s very nice thank you
one tiny bit of high pitch for one second then silence ..



Jamma loom & psu going in

And this is now coming in doors ..
massive thanks man

 

[tb2000]

Glad to see it working! The second or so of high pitch at power up was probably just the linearity coil, nothing to worry about.

 

[Retroman839]

Glad to see it working! The second or so of high pitch at power up was probably just the linearity coil, nothing to worry about.

Very happy mate
No magic smoke 👍😊

I have a black stripe tosh tube next ..


Shall I start a new thread
With yooe measuemts

 

[tb2000]

That a 20" or 14" tube? Difficult to tell from the back! 8 pin minineck tube so if you've not got a chassis for it you'll want a WG K7000 or Hanty with the 8 pin neckboard. A Hanty with the 8 pin neckboard socket is rarer than the K7000 unless you go with a Polo 2 or Polo 3 chassis. I don't think i've ever seen anything pre-Polo chassis with an 8 pin neckboard socket apart from the 10 inch MTC900, MTC900/E and MTC9000 versions.