Harness Identification

JC_R4CER

Active member
vacBacker
Credits
126CR
I purchased a Nintendo .vs board from eBay that arrived today. The board itself has a harness soldered directly to the PCB connectors. The board was sold as tested and working, but does anyone know what this harness may connect too?

 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
As there is no fingerboard you are never going to know.

Sound amp is homemade, so just looks like some custom wiring

Ask the seller what he had it plugged into?

By the way you've got lucky with the CPU's there. Two RP2A03's. Usually it's 1x RP2A03 and 1x RP2A04 dummy CPU
 

JC_R4CER

Active member
vacBacker
Credits
126CR
Yeah... Not really worried as the plan was to remove the harness anywhos.

Got another two RP2A03's coming across the pond too. I'm short of boards now, not chips
smiley17.gif


Hopefully remove the harness and then get the board tested once my Unisystems arriveJonathanClayton2016-06-22 19:53:01
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
I would recommend getting an AV-01 - there was a guy that had a ton of them the other day

Better for testing boards outside of the cab.

If you have a board with a fault it is not going to be easy to sort if it is inside a Unisystem :)
 
Top