Hello from Sidcup :)

Leos

Newbie
Feedback
1 (100%)
Credits
2CR
Hello,

Newbie to this fantastic forum and to world of vintage arcade... Looking forward to contributing where I can to the wealth of knowledge here and to gain some help along the way too!

My recent foray into arcade saw me buy a Taito Space Invaders pt2 cocktail table that's in need of some TLC...
In its past it's lost its original pt2 pcbs, most of its original wiring, switching PSU and transformer, its original coin mech and plastic surround, its original coin tray, the original glass...the list goes on!

I'm looking to try and return it to as near an original configuration as I can...

I've managed to find a great condition SI pt2 set of PCBs and so I'm now on the look out for other parts.  

I'm starting with the more cosmetic parts... Having potentially found an original glass top, next parts on the list are the plastic coin mech surround and the coin box...

Cheers,

Leo
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
Hi Leo
Welcome to UKVAC

It does sound like you have a cocktail box
smiley36.gif


but im sure you will eventually find all the parts you need.

Good luck on your Quest

BTW, p-man on here is having the corner clips made as we speak..

I also had a power supply for one of these too somewere

http://www.andysarcade.net/store/index.php

forcefulfil2013-10-24 23:34:58
 

mathj

Active member
Feedback
5 (100%)
Credits
499CR
hi and welcome to UKVAC

parts for them tables do come up on ebay from time to time when people rip the guts out to mame them
smiley19.gif


or keep a eye on ebay.com as they sometimes come up on there too

math
 

IndyJones

"Partial to Tooty Frooties"
vacBacker
Feedback
6 (100%)
Credits
375CR
Hi & welcome, loads of cocktail owners on here so I'm sure you'll get all the help you need
smiley1.gif


Sounds a great project, taking someting ruined by strippers or mamers & putting it back to how it was all those years ago, must be a great feeling when the project is completed.
 

simonden

Active member
vacBacker
Feedback
20 (100%)
Credits
1,042CR
Hi Leos,

Welcome.

I am only about 5 mins away from you and just so happen to have a box of spare cocktail parts (including power supply), although they are from a Nichibutsu cocktail so no idea if they will fit.

My spare (metal) coin mech surround is coming back from being powder coated on Sunday so if you can get sizes of the hole I can measure to see if it will fit.

Good luck!
 

Leos

Newbie
Feedback
1 (100%)
Credits
2CR
Hi all,

Thanks for the welcome, hints and encouragement!

Looks like I may be in touch with p-man a fair bit
smiley1.gif


Simonden, sounds like the coin surround you have might just do the trick, I'll measure up later tonight

Leo
 

Leos

Newbie
Feedback
1 (100%)
Credits
2CR
Thanks mathj. Great find! I'd prefer the pt2 txer, psu and credit board, but the fact this has a complete harness is tempting...mine has been doctored to accept Jamma boards so has lost the SI board connectors...
 

mathj

Active member
Feedback
5 (100%)
Credits
499CR
Leos said:
Thanks mathj. Great find! I'd prefer the pt2 txer, psu and credit board, but the fact this has a complete harness is tempting...mine has been doctored to accept Jamma boards so has lost the SI board connectors...

there are some bits you could use depending on whats missing from your table but some bits are for a b&w si table only

if you are only after the connectors (2x18 way edge connectors) for the game board and you can repair/reuse the original loom that's in the table drop me a pm with your address details and i will get 2 edge connectors in the post to you as i got a few spare ones here

if you keep looking i am sure something will turn up

math
 
Top