Hello from Weymouth

Arcman

Newbie
Credits
29CR
Hi Guys,

I'm Nathan from Weymouth, I've recently purchased a Ridge Racer sitdown Cabinet on Ebay that was discussed here

http://www.ukvac.com/forum/ridge-racer-2-project-single-seater_topic369287.html

A bit of background, I used to be on Jammaplus for a number of years, more a lurker than a regular contributor. I purchased a Jamma Cab from a member on there, whose name now escapes me.

I did eventually MAME the cab but all is original and would only ever need the J-PAC removed from Jamma interface to put back to it's original state.

I was not expecting in a million years to win the Ridge Racer 2 cab, after reading the thread on here I was expecting to be outbid considerably, my max bid was £110 and even then it was a snap decision, due to A) the weight and size of the thing and B) the issues reported in the listing

Long story short, it's here in my house, I had to pretty much strip it down to bare bones to get the thing through the front door, and it is heavy so so heavy.

In an ideal world I'd like to get the board working, but I've noted all the threads on the internet I can find regards the system 22 and the graphics disappearing and the fact these are no longer being repaired. I would be reluctant to have to MAME it, and I would keep everything as original and "properly" convert it. Firstly however I'd like to explore the limited chances of getting the original board working.

I'm in a position now where I've got a working monitor and power to the boards but I cannot credit or get the game into Test mode. I'm hoping to get some advice from others, would the best place be to post up a thread in the Tech maintenance section to see if anyone would be kind enough to offer some advice on next testing steps ?

Thanks

Nathan
 

Flinnster

The Dino King
vacBacker
Feedback
29 (100%)
Credits
2,566CR
Welcome! Yep I was sorely tempted by that one too - but missed the end of the auction!
Post up a 'Ridge Racer DLX Restore' thread in the tech section. People will be more than happy to help :)
 

FinalFight

Active member
vacBacker
Feedback
73 (97%)
Credits
770CR
Hi nathan I have a ridge racer dlx .. I was the one who sent my spare set for repair to namco (was told it would be the last time they would repair one) it went back 3 times it kept coming back to me with more faults so they gave up in the end refunded me but kept the pcb .. At the moment i still have the original pcb fully working and i bought a fully working rave racer pcb ... I think your best to just keep an eye out for a working stack ... I was told you can mame one without hacking the cab sure it was AnJ who told me.
IIrc you open the coin door and theres a switch at the back to put it into test mode (i will have to check) and theres a tiny button on the coin mech board to credit up

Heres the manual:

https://www.gamesdatabase.org/Media/SYSTEM/Arcade/Manual/formated/Ridge_Racer_-_1993_-_Namco.pdfstegrey2019-04-09 23:42:35
 

Bods

Senior Member
vacBacker
Feedback
5 (100%)
Credits
5,413CR
Welcome Nathan

That was a great price, I remember when they used to appear on ebay years back at £150 which was cheap, saying that I can't remember if it was 2 of them for £150 once but to buy one now at that price is cracking

Certainly heavy, same weight as Outrun Deluxe so yeah

Sure you'll find some working boards at some point, would buy a few if you see them, get some wanted posts up to start.
 

Arcman

Newbie
Credits
29CR
Thanks for the replies chaps much appreciated.

The cab has had a hard life by the looks of it, I will post up a thread in the tech maintenance section with some pictures so you can see what I'm dealing with.

Currently the credit control unit has been disconnected, whilst the test and service switch do nothing whilst the game is on, and no sound, and no 3D graphics.

The fan on the PCB case has also been disconnected, I imagine this has directly contributed to the problems seen right now.

However would be nice if I can isolate fault(s) to 1 or 2 boards in the stack. Will be keeping my eye out for boards/stacks !
 
Top