Help identifying a Konami PCB

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Can anyone identify this PCB for me please? It's a strange one! Doesn't look anything like a Final Round PCB but has a final round sticker on the top PCB. The ROM board on the opposite side has GX687 on it which corresponds to Devil World / Dark Adventure. It's a bit of a puzzler.

It looks like the same PCB as Bensonrad had in this post.

http://www.ukvac.com/forum/gradius-2-japan-version_topic330797_page1.html

Any help appreciated.

DSCF8490.JPG


DSCF8491.JPG
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
It does but not entirely convinced. It could well be Final Round, Porchy mentioned in the Bensonrad post a naff fighting game could be converted. This sounds like the ideal candidate. I'll dig out the eprom reader and take a look, just can't do it now.
 

grobda

"Look at the size of that thing!"
vacBacker
Feedback
7 (100%)
Credits
1,061CR
'870' labelled roms are final round according to the mame driver, but that's nothing like the final round pcb I have, which looks like this;

979_1_fs_pb.jpg


mame source;

https://github.com/mamedev/mame/blob/master/src/mame/drivers/twin16.c

interesting. converting final round to gradius 2 would be nice.
smiley36.gif


edit; although staring at that final round pcb I can only see 1 68k cpu on it.
smiley5.gif


edit2: and the mame driver for final round only refers to the 'main' (68k) and 'audio' (z80) cpus, no code for the 'sub' (68k). Yet they're all lumped into the 'twin16' driver. I guess other (later?) versions could have a faster 68k cpu.

As mame only refers to a single CPU version you might have an undumped twin 68k version of the final round there.
grobda2015-09-10 09:31:07
 

porchy

Active member
Feedback
5 (100%)
Credits
994CR
jonhughes said:
It does but not entirely convinced. It could well be Final Round, Porchy mentioned in the Bensonrad post a naff fighting game could be converted. This sounds like the ideal candidate. I'll dig out the eprom reader and take a look, just can't do it now.

which post was that because quite frankly it sounds like I was talking utter sh!t for the reasons Grobda mentions
smiley17.gif


porchy2015-09-10 11:33:37
 

grobda

"Look at the size of that thing!"
vacBacker
Feedback
7 (100%)
Credits
1,061CR
porchy said:
jonhughes said:
It does but not entirely convinced. It could well be Final Round, Porchy mentioned in the Bensonrad post a naff fighting game could be converted. This sounds like the ideal candidate. I'll dig out the eprom reader and take a look, just can't do it now.

which post was that because quite frankly it sounds like I was talking utter sh!t for the reasons Grobda mentions
smiley17.gif

well Jons has 2 68k CPUs and looks like identical hardware to gradius 2, just with an extra romboard, so a lot more possible than my single 68k version.
smiley36.gif
smiley19.gif
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
The difference I can see is in the top right corner of the board in my first picture. The gradius 2 board has a custom flat chip while mine is populated with several chips. It looks the same as Bensonrads PCB though, his board shared the same chip arrangement at that position.

It's hard remembering who said what in a thread when you're on a phone, sorry for the error.
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
PaulSwan used to tell me another Konami PCB could be swapped to Gradius2/VV. He did tell me what it was but I forgot.
 

Bensonrad

STILL looking for an Outrun & Paperboy!
vacBacker
Feedback
68 (100%)
Credits
940CR
That Vulcan Venture I had, I bought off ebay (I had assumed it was original...it was not). P-man had to repair it for me as was damaged in the post, when I handed it over to him at the Southcoast Slam, he said it was formally Cuebrick.
 

porchy

Active member
Feedback
5 (100%)
Credits
994CR
jonhughes said:
The difference I can see is in the top right corner of the board in my first picture. The gradius 2 board has a custom flat chip while mine is populated with several chips. It looks the same as Bensonrads PCB though, his board shared the same chip arrangement at that position.

It's hard remembering who said what in a thread when you're on a phone, sorry for the error.

im not bothered, just thought i was going a bit crazy
 

Bensonrad

STILL looking for an Outrun & Paperboy!
vacBacker
Feedback
68 (100%)
Credits
940CR
I think with quite a few of the older Konami PCBs, some would come in 2 layer format, I had one PCB once, it was either Haunted Castle or Super Contra and it had a whole layer covered in mask roms instead of a few Erpoms.
 
Top