Help with monitor connector

Retroman839 · Apr 15, 2026

I have a monitor i want to test

But I don’t have the connector

It’s this monitor wells Gardner
1893

Problem is I don’t have this connector

The connector also had this sticker on it

I have red green blue and corrospondong grounds ..

Then sync as vga
Will be hs & vs ?

And grounds . 2 orange possibly grounds ?
Yellow , white and 2 orange between the yellow and white

Any one know this connector ?
Bizlink ?

Thanks

Georgian2 · Apr 15, 2026

This looks like an VGA Monitor from an casino Slots machine. IGT I think.
You#ll need to check where are all the wires going in order to find the right RGB cables. Some wires are for touch if it has one.
hre is the manual froman monitor I earked on. Yours is 1893 but could be close it is worth looking over it.
http://ceronix.com/dlfiles/manuals/1793_SVCMAN.pdf

Retroman839 · Apr 15, 2026

Cheers goergian

Touch makes sence
It has a connector for a screen overlay for touch but no touch screen

Retroman839 · Saturday at 7:41 PM

Knocked up a molex power lead and

Nos wells 19” flat svga ,vga
Still with plastic wrapp

Just to

This little lot into a female vga db-15 and will be in buisness.

Got a cab in mind for this
With misters line doubling mode for 15khz scan doubler.
And groovy mame build