HOTD 1 graphics issue. Fix?

Barbernator

Newbie
Credits
4CR
Hi.
I purchased House of the Dead 1 recently. It initially wouldnt sense the guns. Tweaked the screen gains etc and reset the calibration and it's all good there.
Its still playable but the problem I have is in certain parts of the game, the room/scenery graphics is just lines. You can't make out any detail but the characters are perfect.
Any ideas?
Jas.
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
If it is a video board fault your only option would be to either get the pcb repaired if possibly for around £150/180 or buy a workimg pcb set. You could try putting it into test mode to see if it shows up any errors on pcb test.
 

Barbernator

Newbie
Credits
4CR
Thanks for your reply. All ic's are good in test mode.
Found a guy earlier in the US that is pretty confident he can fix it.
http://www.irepairsega.com/
 
Top