Ic sockets

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Any recommendations of a good place to buy a few ic sockets? Also is it best to get turned sockets or just standard sockets?

I need a few of each to start trying some repairs.

Thanks
 

Monstermug

Active member
Feedback
23 (100%)
Credits
1,807CR
I tend to get turned pin sockets whenever possible. Nice tighter fit and more durable. If low quantities I just order from eBay. Dual wipes serves the purpose just as well though.
 

Judder

Active member
Feedback
2 (100%)
Credits
1,009CR
To borrow this thread a little, what's the opinion on the best pins to use for PCB headers when you are making a board to plug into an existing EPROM / ROM / chip socket?

I originally bought square ones, but you have to really pressure them to go in, and I can't seem to find any good turned ones - just something like the below at £2.99 for a 40 pin seems a tad steep!

Cheers
smiley20.gif


TurnedPinHeaders.jpg
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
On the daughterboards I made, that went into existing Vs Nintendo PCB sockets I used turned pin ones and they work really well. I'll see if I can find some links to ones I have previously bought

Purity2017-01-30 18:48:19
 

QIX

Newbie
Credits
6CR
re: silicon-ark.co.uk cool people into gaming machines, pinball and synths. Stock is massive and as it's mostly surplus it's at discounted prices. Mail order only, website cumbersome ( use the search box) but getting better. Only accepts Paypal. 10/10
 
Top