illuminated buttons

tazfaedodge

Active member
Feedback
3 (100%)
Credits
91CR
I got myself some of these for my jamma cab.
Where is the best place to tap into to take the 12v supply from?

It's got this type of PSU

Hantarex-SMPS-thumbnail.jpg


Nick

tazfaedodge2015-07-16 21:06:40
 

obcd

Active member
Credits
3,830CR
You should be fine using the 12V as long as you don't exceed the maximum output current of the 12V rail. A button lamp usually needs 0.1A on 12V. If you install led lamps in the buttons, it might be 0.03A or even less. (depends upon the type of led lamp)
 

big10p

Coins detected in pocket!
vacBacker
Feedback
13 (100%)
Credits
6,086CR
I wouldn't worry about what they draw. It'll only be a tiny fraction of an amp per LED, as has already been said. I have 9 LED buttons on my cab hooked up to the 12v rail, along with an amp. No probs here.
smiley2.gif

big10p2015-07-17 23:54:10
 

cosine

Active member
vacBacker
Feedback
14 (100%)
Credits
595CR
These buttons are really stiff, are you sure that's what you want? They're pretty and all, but I prefer something that has functionality over looks.
 

strykr

Active member
vacBacker
Feedback
11 (100%)
Credits
1,351CR
cosine said:
These buttons are really stiff, are you sure that's what you want? They're pretty and all, but I prefer something that has functionality over looks.

I'd agree with this, they arent much fun to play on these, have you considered the illuminated gold leaf buttons? Still not as nice to use as a happ or sanwa button, but a lot better then the ones you've linked.
 

big10p

Coins detected in pocket!
vacBacker
Feedback
13 (100%)
Credits
6,086CR
Yeah, mine are the gold leaf type ones. They take hardly any pressure to activate and have short travel. Very nice to use.
 
Top