My Juno First pcb is showing some graphics glitches around text and the playfield. Here's a short vid to show exactly what's wrong:
[tube]IakzXKNHqYI[/tube]
I have a spare non working pcb which I swapped the boards around with and discovered I have 2 fully working top boards, and 1 dead bottom board and also could see the glitches were still present using both top boards so that narrows it down.
Voltage from the cab is at 4.97, and the glitches appear the same on 2 different cabs.
I've pulled the roms from the bottom board and dumped them and all show ok.
[tube]IakzXKNHqYI[/tube]
I have a spare non working pcb which I swapped the boards around with and discovered I have 2 fully working top boards, and 1 dead bottom board and also could see the glitches were still present using both top boards so that narrows it down.
Voltage from the cab is at 4.97, and the glitches appear the same on 2 different cabs.
I've pulled the roms from the bottom board and dumped them and all show ok.