Juno First Graphic Glitches

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,264CR
My Juno First pcb is showing some graphics glitches around text and the playfield. Here's a short vid to show exactly what's wrong:
[tube]IakzXKNHqYI[/tube]
I have a spare non working pcb which I swapped the boards around with and discovered I have 2 fully working top boards, and 1 dead bottom board and also could see the glitches were still present using both top boards so that narrows it down.

Voltage from the cab is at 4.97, and the glitches appear the same on 2 different cabs.

I've pulled the roms from the bottom board and dumped them and all show ok.
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
I've grabbed the schematics and will have a look at them over the next few days to see if it's one I can help you with. Are you looking for a guided troubleshooting effort or after somebody to repair it? Have you got a logic probe?

I hadn't realised it's a really cool game so I should dig my board out and fire it up!
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,264CR
Looking to try and fix it if I can, I've been in this hobby long enough now that I feel like I should try and learn a little about pcb's! I've got a logic probe. Any help appreciated
smiley1.gif
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
I'd be inclined to suspect graphics RAM or sockets, OR if it's a 2 layer set potentially a bad inter board connection, however that's without looking at any schematics at all yet. If the glitches are static, then more like graphics ROM, but I think in the video they come and go and change a bit don't they?

I suppose it's also potentially a timing and / or chip selection problem? All of this makes the assumption that the video RAM / ROM is relatively independent of the main CPU and that it's not being checked during any kind of test mode?
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,264CR
Actually I haven't tried a different pair of ribbon cables, will do that later!

The glitches seem static on the high score table and title screen, but different in game.
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,264CR
Thanks Martin, let's see how I get on and then perhaps I'll fill my car with faulty boards and pop over for a week
smiley36.gif
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,264CR
Changed the ribbon cables over and the glitch is still there, but slightly different this time, now there are horizontal lines running across parts of the playfield, but the title screen is the same as above.
 
Top