LCD Conversion

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Hi Everyone,

I'm trying to decide which monitor option is the best for a Crystal Maze machine I have bought recently. I'm juggling between transporting the original monitor off for repair or installing a reliable LCD monitor.

Looking at the LCD option - I'm using a convertor for VGA to RGB Comp Synch on one of my cabinets. I'll need an RGB to VGA for this - there are loads on Ebay. I'm struggling for a 5v power supply in this particular game though and would like to avoid providing a 5V input from an external source. Can anyone give me any advice on what is the best set up for an LCD conversion before I buy something which (will do the job but) might not necessarily be the best?

Apologies if there is info on this, I'm sure this is regularly asked (although I have done a search).
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
its always better to use a RGB CRT monitor. if you can get it repaired at a fair price then go with that option as your first choice

only use an LCD as a absolute last resort
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Repairing the monitor was the other option, but this is only a quiz machine. Who repairs monitors in the north west? It's 20" so easily transported.
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
If I go for LCD, which I am leaning to, I know a way to do it without hacking any of the original wiring and a straight swap back for an original monitor would be possible. Thanks for the info, I've ordered a converter and a 12v output is available on the board.
 

JohnnyChaos

Blows own trumpet for CHQ cabs
Feedback
4 (100%)
Credits
325CR
jonhughes said:
Repairing the monitor was the other option, but this is only a quiz machine. Who repairs monitors in the north west? It's 20" so easily transported.

We normally take the chassis off the tube and post it to gunblade
smiley2.gif
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Well I managed to repair the original monitor myself. A few dry joints on some components but now it's working fine. I'll keep the video conversion board as a back up, but hopefully I won't need it.
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Yes, I think I have been quite fortunate there and it has saved me a load of pain and expense.

Now (a big hopefully) all I need to do is replace a timer chip on the video board and the game should be fully working.
 
Top