Led lighting

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I am thinking about fitting led strip lighting in my games room to add some background mood lighting. Not sure which ones to got for as there seem to be different sizes- smd 3528 and 5050. Which type would you suggest would be better for my application? These will run around the room at waiste night behind the machines. I'm gong to need 26mtr.
According to most eBay adverts they come in 5/10/15/20m lengths which means 5m sections joined together but looks as if I will need a power supply for each 5m sections and a seperate remote. All I want to do if possible is join them all up to one controller so they can be activated together.
Would this be possible?

Thanks,
Steve
 

tin

Active member
vacBacker
Feedback
3 (100%)
Credits
673CR
My experience the ebay stuff does need separate feeds to each 5m length, the power drop across the 5m is too much to properly power even the next 5m. Obviously there's loads of different manufacturers out there so maybe some types work OK, but I haven't found them.

If you're going for the colour changing stuff, then - if the controller and PSU can handle the current required for 26 metres - it would be OK to run multiple cables from the controller, one for each 5m length so they can all be controlled in unison.

There are places that do more professional stuff, but they are ££££ of course :)

I would also buy just one 5m to start with and see if you like the colours it generates. The first one I bought gave off a really manky colour light no matter what colour I chose.
 

Battlezone

Active member
Feedback
1 (100%)
Credits
410CR
Steve,

I recently looked into these little beauties inspired by Colin's use of one
on his Slapstic test hardware. The power is proportional to the number
of LEDs (not the length). The stripes come in several LED pitches (144LED/m,
96LED/m, 60LED/m, 30LED/m etc), so pick a density that suits.

The WS2812b is the driver chip (in every LED) I'd go with (it drives a 5050).

The best article I've seen on this (almost) drives 1000+ LEDs with
three 10A power supplies and one old Arduino at 30FPS. You'd
just need another supply or fewer LEDs to avoid the "almost".

http://wp.josh.com/2014/05/13/ws2812-neopixels-are-not-so-finicky-once-you-get-to-know-them/

I was thinking about using them for a half size/quarter area Pacman
display (144x112), but decided I couldn't afford the costs
until the price (and power) drops some more. The idea would have been
to tap the colours off the pacman display hardware in real time
(either before or after the colour PROM).

Battlezone2017-01-30 09:34:43
 

GadgetFreak

Active member
vacBacker
Feedback
7 (100%)
Credits
963CR
I've driven 8192 WS2812B LEDs off one Teensy 3.1 using FastLED with parallel output so 8 pins driving 1024 LEDs per pin. PSU rating should really be 0.3W / LED, but they rarely draw this kind of power but it's always better to leave some headroom on your PSU's.

In relation to the 5050 strips an easy way to gain control over an unlimited number of them would be to go down the Philips Hue route but their price is eye watering!

But I did come across these https://shop.dresden-elektronik.de/funk-1/solutions/vorschaltgeraete/fls-pp-lp.html?___store=english&___from_store=deutsch the other day, also on Amazon https://www.amazon.co.uk/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

They are supposed to be Hue compatible and each one can control strips of 300 LEDs, so you could use 10m of 30 LEDs/m and to avoid any chance of power loss connect the controller to the middle of the strip. Using 3 of the controllers would happily drive 30m and then controlling them with Hue would keep them in sync. I haven't used these myself, but there are several AV forum posts from people who have.
 
Top