Loading issue for Time Crisis 2

gjclark5

Newbie
Credits
5CR
Hi all,

I have a Time Crisis 2 dual screen which has developed a loading issue on the right hand screen. Does anyone have any ideas as to what the issue might be and a way of fixing it, and pointers gratefully received. Have uploaded a photo of the screen it's getting stuck on

IMG_0277.JPG


Many thanks
Graham
 

tb2000

Active member
Feedback
4 (100%)
Credits
3,579CR
PCB fault, likely a memory chip somewhere on the main board. I have three sets all with similar problems! Probably easier to locate a replacement pcb set.
 

bbz149

Active member
vacBacker
Feedback
26 (100%)
Credits
1,608CR
There are 2 types of boardsets for TC2 and if I rem correctly they have to match! I do have a complete TC2 setup I was thinking of selling but id need to check what ver it is
 

bbz149

Active member
vacBacker
Feedback
26 (100%)
Credits
1,608CR
gunblade said:
there are 3 types, 2 different  rom/sec boards for system 23 and a super system 23 version
it's been driving me nuts trying to remember who I swapped mine with so they could make a pair! Sure it was you ages ago? if so can you rem which one you sent me?bbz1492017-07-21 07:27:52
 

gunblade

Active member
vacBacker
Feedback
23 (100%)
Credits
9,130CR
blimey that was like 5 years ago

if you open them up and look at the security board there should be a code like TSS4-the cabs will link if they have the same security board-although I am sure there is single cab version though that does not link
 

bbz149

Active member
vacBacker
Feedback
26 (100%)
Credits
1,608CR
gunblade said:
blimey that was like 5 years ago

if you open them up and look at the security board there should be a code like TSS4-the cabs will link if they have the same security board-although I am sure there is single cab version though that does not link
smiley36.gif
Yeah I never forget as there was yet an unclaimed Fav in the deal!
smiley4.gif
 

gunblade

Active member
vacBacker
Feedback
23 (100%)
Credits
9,130CR
bbz149 said:
gunblade said:
blimey that was like 5 years ago

if you open them up and look at the security board there should be a code like TSS4-the cabs will link if they have the same security board-although I am sure there is single cab version though that does not link
smiley36.gif
Yeah I never forget as there was yet an unclaimed Fav in the deal!
smiley4.gif

please don't make me put the stilettos on again
 

IanH

User
Credits
277CR
We have one at work that's doing exactly the same thing! Ive tried reflowing the video memory and the chip there connected too but it hasn't made any difference. I'm not brave enough to swap the memory chip. Theres 2 untested ones on ebay!
Cheers
Ian
 
Top