Mercs CPS1 issues

seanr28

Active member
Feedback
9 (100%)
Credits
319CR

Have some issue with the above game

Working but has graphics issues. Some parts of the graphics are missing and the player/enemy sprites are flickering, any suggestions please?

I have also tried another CPS1 A board (which definatley works as I have tested with Street fighter 2 Champ) but when connected to the MERCS B and C boards the whole screen is garbage but sound can be heard.......what am I missing please?

regards

sean

 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
Sounds similar to the problem I had with mine. That turned out to be a bad PAL chip on the B-board. O224B. Replaced that and it worked fine.
 

seanr28

Active member
Feedback
9 (100%)
Credits
319CR
muddymusic said:
Sounds similar to the problem I had with mine. That turned out to be a bad PAL chip on the B-board. O224B. Replaced that and it worked fine.

thanks, out of curiosity how did you manage to get t down to just that chip being at fault?
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
seanr28 said:
muddymusic said:
Sounds similar to the problem I had with mine. That turned out to be a bad PAL chip on the B-board. O224B. Replaced that and it worked fine.

thanks, out of curiosity how did you manage to get t down to just that chip being at fault?

from what I remember I think it was porchy that did the repair
 

seanr28

Active member
Feedback
9 (100%)
Credits
319CR
ok, what about the different CPS1 boards, I have 3 of them in total, but the one for mercs is very different and one that came from SF2 wont work with mercs at al??
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
seanr28 said:
ok, what about the different CPS1 boards, I have 3 of them in total, but the one for mercs is very different and one that came from SF2 wont work with mercs at al??

CPS1 came in 2 board types

they cant be interchanged and the PAL chips are different for each game too

they are usually socketed so if they fail can be changed
 

seanr28

Active member
Feedback
9 (100%)
Credits
319CR
silverfox0786 said:
seanr28 said:
ok, what about the different CPS1 boards, I have 3 of them in total, but the one for mercs is very different and one that came from SF2 wont work with mercs at al??

CPS1 came in 2 board types

they cant be interchanged and the PAL chips are different for each game too

they are usually socketed so if they fail can be changed

thanks, thats useful....will check later,

where would i be likely to find a replacement chip if that the case?
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
Both A-boards should show exactly the same fault. If not I'd test the MERCS A-board on SF2 and see what happens there. You might have more than one bad board.

I had 2 MERCS pcb's one was fully working, the other had graphic glitches and flickering sprites so I just swapped over the socketed chips until I identified the bad one.
 

seanr28

Active member
Feedback
9 (100%)
Credits
319CR
muddymusic said:
Both A-boards should show exactly the same fault. If not I'd test the MERCS A-board on SF2 and see what happens there. You might have more than one bad board.

I had 2 MERCS pcb's one was fully working, the other had graphic glitches and flickering sprites so I just swapped over the socketed chips until I identified the bad one.

but I thought that some of the A boards are incompatible?? I know the SF2 A boards look very different to the ones on mercs and final fight for example?? will test in a bit anyhow though.
 

seanr28

Active member
Feedback
9 (100%)
Credits
319CR
ok, just tried it and it works on my other 2 A boards, so its definatley a faulty A board, any suggestions on who best to repair? or things to check?

could some of the dip switches be causing an issue?
seanr282015-03-02 15:37:46
 

pulstar

Active member
Feedback
41 (100%)
Credits
459CR
All A boards are interchangeable.

There are the longer version and the shorter versions of the A board (the longer ones are older and are made up of mostly though hole components, the short versions have more surface mount components). There are also Dash variants, which have a faster CPU, these will play all games, it'll just some of the older games faster (such as Final Fight).
 

muddymusic

The Repro Guy. Art and Parts supplier
Staff member
vacBacker
Feedback
52 (100%)
Credits
2,265CR
I'd bin it. They are extremely difficult to repair even for the guys who really know their stuff.
If you've got working ones look after them. A-board seem to be dying off rapidly. From my own experience the shorter later revision seem to hold up better, it's all the long ones that have gone faulty for me.
 

seanr28

Active member
Feedback
9 (100%)
Credits
319CR
even though it works, with just some sprite issues? surly that must be fairly easily repaired? I would be inclined to agree if it was totally dead.
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
seanr28 said:
even though it works, with just some sprite issues? surly that must be fairly easily repaired? I would be inclined to agree if it was totally dead.

you want to send it to Australia or USA then its possible to repair

but here most guys wont touch an A board to repair

its possible to repair but its a real pain in the butt that no one cares for their repair
 
Top