Midway SI board

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Bought this on Ebay

http://www.ebay.co.uk/itm/171565842011?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

and was surprised to win it for for that! anyway board clearly not been used for a looong time but I noticed some hacks on the roms and dips, was thinking maybe new roms of another type had been used? anyone know?

cheers Ronnie

DSC04148.JPG


DSC04147.JPG


DSC04146.JPG


DSC04145.JPG
 

david_orton_2000

Green Mario
vacBacker
Feedback
8 (100%)
Credits
344CR
Hmmmmm, interesting and odd!
I notice they are 2708s, so if you can find/borrow a reader, get them dumped!...
that is...as long as the legs do not fall off or legs stay behind in the socket...

I'd have to check which pin has been commoned there.

Goes without saying though, convert to 2716s or even 1 single Eprom for more reliability.
 

philmurr

Active member
vacBacker
Feedback
48 (100%)
Credits
2,374CR
Looks like an Invaders Revenge conversion by Zenitone-Microsec.

Missing the potted sound board so won't be much use, so best convert back to original
 

philmurr

Active member
vacBacker
Feedback
48 (100%)
Credits
2,374CR
Actually looking at the EPROM label close-up and the fact that it's from an L-shaped boardset it's probably more likely to be a Zenitone Super Invaders.

Afraid I've got no information about that game at all
smiley5.gif
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Ah ok, my reader won't read the 2708s plus leg has fallen off the one I removed! I guess I will need to burn a set of 2716s if I have any, or do you need and roms with a Braze kit?

Cheers Ronnie
 
Top