Can anyone help me with a Missile Command please?
I've got a board on the bench that was dead. It's now working after some clock issues, and then a duff ROM but I get no yellow background in the last 32 lines of the screen.
I'm aware that the last 32 scan lines are a special area where the CPU speed is slowed by half (625Khz) and quite a bit of funky stuff goes on there related to 3-bit colour ram.
Could anyone narrow what area I should be looking at please as t all gets a bit complicated from there and my understanding of the board is not that great.
To the best of my knowledge I think the clocks are generally OK, and that the RAM is OK since all the tests pass (RAM tests on the Fluke are also OK). I'm not sure I understand the whole 3-bit, vs 2-bit colour operation enough to diagnose further.
Does the fact the yellow background is missing indicate for instance that it's using 2-bit colour when it should be using 3? There is activity on the 3rd colour bit output (into unlatched RGB signals) but it's difficult for me to know if it's the correct activity.
I've got a board on the bench that was dead. It's now working after some clock issues, and then a duff ROM but I get no yellow background in the last 32 lines of the screen.
I'm aware that the last 32 scan lines are a special area where the CPU speed is slowed by half (625Khz) and quite a bit of funky stuff goes on there related to 3-bit colour ram.
Could anyone narrow what area I should be looking at please as t all gets a bit complicated from there and my understanding of the board is not that great.
To the best of my knowledge I think the clocks are generally OK, and that the RAM is OK since all the tests pass (RAM tests on the Fluke are also OK). I'm not sure I understand the whole 3-bit, vs 2-bit colour operation enough to diagnose further.
Does the fact the yellow background is missing indicate for instance that it's using 2-bit colour when it should be using 3? There is activity on the 3rd colour bit output (into unlatched RGB signals) but it's difficult for me to know if it's the correct activity.