Missile Command Pcb Issue

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I swithed on my missile command today and was confronted with this pic,

missile_3.JPG
On fist look it seems as if it isnt syncing. I have tried the monitore controls but still the same. I have a spare pcb which i then tried and the picture is perfect and synced.

Any idea's what the problem could be and where i should look?

My skills are limited so be gentle!!!!!!!!!!!!

Thanks,
 

VectorGlow

Active member
vacBacker
Feedback
34 (100%)
Credits
900CR
How limited are your repair tools?

Logic probe or oscilloscope?

Decent soldering iron?

Solder?

Spare parts?

Etc.

smiley1.gif


To be honest, it's going to be a dodgy chip in the sync circuit or the main video display circuit. Various repairers here (including myslef) could no doubt repair it, but I wouldn't recommend doing it yourself unless you have ths skills and the tools. Missile Command boards are also an especial pain in the backside to fix and are prone to failing.
VectorGlow2015-08-02 11:26:17
 
Top