Missile Command Prototype Marque...

andyman

always pull away from your face
Credits
1,059CR
Cool
smiley20.gif
 

Muerto

Administrator
Feedback
2 (100%)
Credits
157CR
Excellent work! - very exciting reed!
Maby atariscott from KLOV could shed some light regarding the whereabouts of the MC prototype.... - after all, i _think_ he was the guy that had the MC2 pcb from '81...
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
Nice one Andy - that marquee picture you have shown is recent.. Someone on KLOV owns it but isn't owning up to it so the proto roms are out there.
 

Superully

User
Feedback
0 (50%)
Credits
24CR
the prototype marquee was vectored by the Vectorking himself (upon my request) - Etienne from the Dragon's Lair Forum. I have a prototype version here with me, because my idea was / is to install it instead of the standard marquee. haven't gotten around to do so yet, because my MC is still waiting on the restoration queue. once it moves to the front, i'll give it a try!

fabulous write-up on the technique behind it, andy!!!
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
I think if the proto code ever came available you could have a plastic marquee top with possibly small LEDs to light it.
 

P-Man

International man of mystery
Feedback
4 (100%)
Credits
1,273CR
It will be interesting to see if any code turns up.

If not, someone could pull their finger out and actually add the code into the existing roms. If someone were to do that, i would go with the simple decoding idea, send the 4 outputs up to the marquee box and have another little 4 to 16 decoder turning that into 16 channels, that way you could have a lot of control over which lights came on and when, instead of just having the standard 4 channels. It would look excellent if you had that much control over them blinking away actually meaning something :)
 

P-Man

International man of mystery
Feedback
4 (100%)
Credits
1,273CR
hi there, yeh Scott has most Atari proto stuff out there. His pcb does not have the extra output circuit loaded, so its unlikely to have the code either.

I have asked Scott for the code, but he is not known for sharing that sort of thing.

thanks
 
Feedback
1 (100%)
Credits
40CR
Maybe this is talking about the same person, but Tony Temple talks about a picture of a proto-MC photo taken with an iPhone from one of the original devs in this video. So the example being discussed exists to this day.


ArcadeAddict772013-11-22 12:01:03
 

jhermann

Newbie
Credits
10CR
I don't think you're looking at the right parts of the board; the board in that cabaret has locations for two ROMs on ROW three, and both locations have ROMs installed. He has a rev 1 (maybe even a rev 0) PCB; I have only seen two boards like that (including his picture); I have the other, but the ROMs were missing. The schematics released by Atari do not apply to these boards; in particular the ROM locations are completely different from the schematics. I have repaired maybe one hundred MC boards in my years; and I have only held one rev 0/1/? PCB and have been looking on Ebay and other places on-line at hundreds of other MC boards never seeing this rev of pcb. If those ROM codes have not been archived, if/when one of his ROMs dies, the set may be lost forever. FYI, the transistors and related circuity for the marque on my board are NOT populated either.
 

P-Man

International man of mystery
Feedback
4 (100%)
Credits
1,273CR
I realise that Scott's pcb has a slightly different rom layout to normal pcbs, but the number of roms still adds up between his and production...

- Scotts pcb has room for 12 roms, all populated with 1K 2708's.
- A regular pcb has room for 11 roms, but only 6 are populated with 2K 9316 mask roms.

I dont recall having seen a missile command pcb with Scotts layout in the past, but i have repaired one with factory 2708's fitted before i'm sure, its not rocket science to deal with extra roms etc..

All Atari seems to have done between Scotts pcb and the production pcb is to condense the placement of roms on row 1, omit one and add an extra buffer, the room for the single rom placement on row 3 is probably restricted to 2k in size. They have probably re-shuffled the code around to fit it into everything in row 1.

We all know the scarcity and fragility of unique game code, and scott probably has dumped the roms, he is just known for not letting these things out into the wild for various reasons.

I will be going to see Scott in the new year, so i'll get a good look at the machine and pcb when i'm there :)

P-Man2013-11-27 10:28:38
 
Top