Monitor fixing needed

Jennaj264

Newbie
Credits
2CR
Hi
I have a pga golf tour arcade machine with what I think is a broken monitor. I need someone who can come and fix it pls? I'm in a place called Tolworth which is two miles from Kingston upon Thames and twenty mins from London.
If you can help or know someone who can, pls could you get in touch. I have tried so many avenues with no help and am starting to think it will be easier to just get rid of the machine which I really don't want to do.
Any help will be greatly appreciated.
Kind regards
Jenna
 

big10p

Coins detected in pocket!
vacBacker
Feedback
13 (100%)
Credits
6,087CR
Monitor issues are almost always down to a chassis (PCB) fault, rather than the tube itself. So, if you're able to remove the chassis (read a guide on how to do it safely) yourself, you can send it off to be repaired. Members Gunblade and tb2000 offer this service and are both highly recommended.
smiley1.gif
 

big10p

Coins detected in pocket!
vacBacker
Feedback
13 (100%)
Credits
6,087CR
In that case, might be worth posting in the tech/maintenance section describing the fault in more detail. What (if anything) comes on the screen, etc.
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
I think (might be wrong) there's some miscommunication going on here. @Jenna, when you say you've had the chassis checked, do you mean that or do you mean the circuit board inside the cabinet on it's own - the game Printed Circuit Board - aka PCB or the smaller (usually) circuit board attached to the glass screen (the CRT)?

Sorry but people assume a level of technical knowledge here sometimes, it is after all a collectors forum. You sound like you're just trying to use a machine rather like an everyday appliance rather than learn everything you can about them in a mildly obsessive way
smiley2.gif
To get help here you really have to overload us with information, ideally with pictures and/or videos. "It's not working and I think it's the monitor" doesn't give us much to go on which I'm sure you can understand.

It does sound like you need someone local to come and do some basic diagnosis to confirm it is the monitor and walk you through a few basics. There aren't companies around these days that do this onsite stuff, only amateur collectors. So guys, is there anyone near Tolworth able to help Jenna out? If no one is able to then I think you're probably right that you're better off selling it. These things require maintenance especially as they get older, you do really need to learn some of the basics if you want to keep it running.

Dan
 

Jennaj264

Newbie
Credits
2CR
Hi Dan
Thanks for that. As you can tell, i know nothing. I bought the game cos i love it. I sent the circuit boards off and they were sorted. The fans all work, the monitor will make a noise when a button on the inside is pulled and the machine fires up but nothing more. No pictures on screen or sound of game playing. I would love someone who knows how to help to come and help me so yes please.....anyone in my area that could come take a look id be very grateful!!!
 
Top