Monitor not working

kj23

Newbie
Credits
1CR
I've never actually played it yet, i thought there was at least 2 game but there could be 60 i suppose.

Is the dip switch a physical button on a board in the back of the cabinet or am i looking at that setup screen on the monitor?

Thanks.
 

big10p

Coins detected in pocket!
vacBacker
Feedback
13 (100%)
Credits
6,092CR
The dip switch is the blue block on the game PCB with tiny white switches. You'll need a small srewdriver or something, to move the switches.
 

kj23

Newbie
Credits
1CR
Cheers, can i do it when the screen/game is active or is it best to switch off, change switches then power up again?
 

Jon-A-Tron

Active member
Feedback
2 (100%)
Credits
330CR
The monitor is a CRT that is mounted sideways. This is why I cant see a chassis on the shelf that the game board is positioned on. This is what confused me first.

It has been mounted upside down. This is because the dip switch 3.1 (physical switch set of 4 on game board) is set to off. Set this to on and the screen should flip.

dip switches 1 and 2 are in the settings that you have shown on the screen. They are a line of 8 on/off settings for how many coins it takes to start a game. The second line of 8 on/off are the settings for the cabinet. Currently you have it set to play no demo music as dip switch 2.1 is set on. If you want free play then set dip switch 2.3 to on.

edits. confused myself.

DIP Switch 1 - Software on test screen (Coins/players)

DIP Switch 2 - Software on test screen (Settings)

DIP Switch 3 - Hardware on game board (Video output settings/save score)

JonTron2017-10-12 11:25:56
 

kj23

Newbie
Credits
1CR
It's kind of getting there, i seem to have screen the right way around but out of focus in game selection mode, perfect but upside down in game selection mode or right way around in menu mode. That's between swapping about switches 1 and 4. Currently 1 is set to off, and 2-4 are on, that gives me screen the right way, in focus but on the set up option.
Any ideas? Thanks.
 

Shun

Active member
Feedback
1 (100%)
Credits
501CR
When you say out of focus, do you mean it is blurry or off centre? Can you post a picture?
It looks like an LCD screen so I'm assuming it's not blurry.
 

kj23

Newbie
Credits
1CR
It was out of focus almost but i think i'm sorted now by trial and error. 1, 3 and 4 are set to off and 2 is on. That give me the option to play the games, in focus and screen right way around!!!!
Ideally i'd like it set to free play as otherwise i need to open the coin bit at the front and press a little black button on the corner of a circuit board which adds credit.

Thanks!
 

Jon-A-Tron

Active member
Feedback
2 (100%)
Credits
330CR
Free play is set in the setting menu

free_play.jpg


Set this to 'On' and should change the text below to 'Free Play - Yes'

JonTron2017-10-12 14:16:42
 

Stickman

Active member
vacBacker
Feedback
1 (100%)
Credits
355CR
Don't forget to press 'start' to save the DIP switch config (Shown as Start : Setup in the bottom right) , otherwise when you restart after taking out of test mode it will not have saved and Free Play will not be enabled.

If it is wired up like my Jamma that is the Player 1 button, but you can check in the input screen by pressing S2 several times to get to the input screen and pressing each button or moving the joystick will change the colour to show it activating.

You won't brake anything by having a play around.
Stickman2017-10-12 17:23:02
 

kj23

Newbie
Credits
1CR
Think i'm all sorted now! Back is on, free play is active, screen is the right way around and all seems to be well, until next time i wreck it!
Thanks for all the help, really appreciate it.

Anyone know who would be a good person to troubleshoot a Pachislo machine, i have one with a funky screen and sound?
 
Top