First question has occurred to me following getting my import Space Harrier as seen in the other thread - in summary it's a US import missing the monitor.
The ISO in the cab is currently wired to 120V, but can fairly easily be wired to accept 230v, however, the output for the monitor is (according to the wiring schematic) 100V.
I was hoping to drop in a spare Hantarex mtc9000, however, these are normally powered by 128v ISO transformers. The hantarex manual states that the voltage tolerance is +10 -20%, which would make it theoretically run on 102.4 volts, close to what we will have..
So question is, will I get away with the existing ISO transformer at 100V to power a MTC9000?
The ISO in the cab is currently wired to 120V, but can fairly easily be wired to accept 230v, however, the output for the monitor is (according to the wiring schematic) 100V.
I was hoping to drop in a spare Hantarex mtc9000, however, these are normally powered by 128v ISO transformers. The hantarex manual states that the voltage tolerance is +10 -20%, which would make it theoretically run on 102.4 volts, close to what we will have..
So question is, will I get away with the existing ISO transformer at 100V to power a MTC9000?