Monitor problem

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Hi guys, just been to a friends house and while playing his cab this happened to the monitor on a 60 in 1 board
p1_2.JPG
p2_2.JPG


I tried all the pots on the back but no change. Could a cap kit fix this or do i need to send it off for repair for him?

I think it is a 900E hantrex chassis
c1_2.JPG


Thanks,

Steve
 

PaulSwan

ZZZ
Feedback
1 (100%)
Credits
1,118CR
I've had this type of picture on a 900/E that was sorted out with a cap kit...

SAM_1286w.JPG


...along with other weird sync & picture artifacts on various chassis that have been cleaned up with a cap kit.

That said, I've also had complete sync loss due to faulty transistors in the sync circuit. It's less likely a complete loss of sync is a cap issue.

Paul.
 
Top