Moon Cresta reset ?.

cliff_poole

Active member
vacBacker
Feedback
6 (100%)
Credits
1,069CR
I'm looking at an original SMC-2FJ board (the one with the pins). It has a normal Z80 and unencrypted Moon Cresta ROMs.

The processor is not getting a proper reset at power on. In the Moon Cresta service manual, pin 11 of 6E is tied to 5V, I've confirmed this on my board. Galaxian schematics however, have a normal diode cap resistor reset circuit feeding pin 11 of 6E. I can't find a similar style reset circuit on the board, and the reset line doesn't connect to any of the offboard connectors.

Does the original encrypted CPU module have an internal reset ?. If it does, I'll just mod my board.
 

cliff_poole

Active member
vacBacker
Feedback
6 (100%)
Credits
1,069CR
That's brilliant, I hadn't found that post, thanks.

You are probably right about the watchdog. It hadn't occurred to me that they wouldn't bother putting a power on reset circuit in at all, and the Fluke wasn't complaining about active force line like it normally does.
 
Top