more cpsIII issues

JohnnyChaos

Blows own trumpet for CHQ cabs
Feedback
4 (100%)
Credits
325CR
on my last cpsiii board one of the inputs just stooped working.
its replacement arrived today and it doesn't show any red on any of my cabs!?!?! Aagghh.

Is this the most flaky system ever? Or im I just having bad luck?

And anyone know what to do about the missing red, what to check first?

I'm thinking I best learn how to fix this.
 

JohnnyChaos

Blows own trumpet for CHQ cabs
Feedback
4 (100%)
Credits
325CR
I need a working motherboard :)
Although I suppose a faulty one would maybe help with testing.

All I've found so far that seems faulty is this.... resistor?
It says 620 on it. But I can't find a replacement part. Anyone know what to search for?

c7a612c67c5c88796851f072c0c38b41_zpse88e7682.jpg
 

JohnnyChaos

Blows own trumpet for CHQ cabs
Feedback
4 (100%)
Credits
325CR
turned out that was the wrong one. But cleaned the board up some more and that resisitor read fine after. So doesn't need replacing after all.

Ive found that if I leave the system on for a while the red gradually comes back.

It returns to the bios menu first and pretty quick.

but when you start the game any red is made up of horizontal flickering lines.

Then gradually that improves too until its pretty much ok.

Takes about 40min.

Anyone any ideas where to start?

Could it be an iffy simm?
 
Top