Ms. Pacman plus

mx5dob

Active member
Feedback
4 (100%)
Credits
83CR
Hi all. I ordered a midway pacman PCB, converted / Hacked up to ms. Pacman plus.

Any idea how it can tell if it's running in ac or Dc by looking at photos if the PCB? Would like to know before it arrives

Screenshot_2022-03-03-11-22-27-80_260528048de7f2f358f0056f785be619.jpg

Screenshot_2022-03-03-11-22-45-76_260528048de7f2f358f0056f785be619.jpg
mx5dob2022-03-03 11:27:48
 

mx5dob

Active member
Feedback
4 (100%)
Credits
83CR
sukhbir said:
Looking at the pictures I can see there are two rectifier diodes (d7/d8),so it looks as though you need a.c input volts.

Thanks!

Any idea if a jamma adapter exists that doesn't require the board to be DC?
 

mx5dob

Active member
Feedback
4 (100%)
Credits
83CR
jonhughes said:
It should be fine with a direct DC input. I run/test/fix all those boards on DC input and they have all been ok.

Great to hear. Thanks! Can you recommend an adapter? The ones I've seen say they work on DC boards only
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Everything is overseas that is on Ebay, but they are neat PCB type adapters. They should all work. Anything that states Pacman to JAMMA is for attaching your AC Pacman board to a DC jamma set up. It’s going to be pricey to import one though. You might be better making one or having one made for you in the UK. I have made these……but they’re tedious to make.
 
Top