Ms Pacman

joel88

Newbie
Credits
5CR
Hey guys,
Basically, i've inherited an old sitdown cocktail style Ms Pacman machine which has been in the family for years.
Up until about a year ago it was working fine. Now, it's
not.
On boot, on screen all i get are dashes all over the place.

There are a couple wires which need
re-soldering, but i think there always were. However, i've noticed a
single red wire at the bottom of the cabinet. I'm pretty sure that this
wire used to be connected to the PCB somehow - possibly between the 2
smaller boards attached to the main one.
But that might just be made up in my mind.

I'm really dense about all this, and i'm pretty sure the board is a 'bootleg' i've read about.
What are the 2 smaller boards attached to the main PCB? If i tocuh the smaller board when switched on, the game flickers slightly and different characters appear - which lead me to believe this was the problem.

But any help would be appreciated. A couple pics for you:

Board: http://imageshack.us/photo/my-images/833/20120711083829.jpg/
Error: http://imageshack.us/photo/my-images/189/20120711084036.jpg/
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
That's definitely a bootleg, and it has a PCB error, so probably nothing to do with that red wire, especially given you think that red wire has always been like it - can't say 100% on that though without seeing the wire etc.

The reason you get the screen flicker a bit when you prod the smaller of the two little PCBs is that they're custom chip replacement PCBs and the smaller of the two is the replacement for the Namco video address custom chip (forget the exact name off hand). I'd say it's unrelated as without that custom chip (or the little board) working you'd either have no video or a WAY more messed up screen than it is.

Basically, people on here may be able to talk you through some basics like voltages, possible ram errors etc., but then it's PCB repair time.

Where are you located and in what country? Always useful to fill your location out in your profile...
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Sorry - just realised the PCBs upside down to how I always work on them - my bad!

So, the smaller of the boards is the 'Sync Bus Controller', and as such is related to the Z80 - so COULD possibly be your issue. Therefore start by making sure that's seated well in the socket (though I guess you've probably already done that).
 

joel88

Newbie
Credits
5CR
Thank you. It's good to know that there are people who know about this kind of thing.

Yep, i've tried reseating both of the cards a few times.
If i bought a new PCB, is it likely that i should be able to swap it for mine, plug it in and it will work?!
Noticed you can get them off eBay for around £100 delivered.

Obviously i would like to fix this one if i could, but i dunno.

This red wire, i have a feeling used to be connected to the PCB - is that likely? Do the boards sometimes have single wires connecting things? The wire isn't long enough to be anything else really, only about 30cm long

I'm from Leicester, UK by the way.
 

cliff_poole

Active member
vacBacker
Feedback
6 (100%)
Credits
1,069CR
It could be that one of the legs of the small PCBs has had a bad connection with the socket on the main board at some point in time, so someone has bridged it by soldering the red wire from the small PCB to the main PCB ?.

If you look at it really closely under a good light, can you see where the wire might have come from ?.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Hang fire with buying a new PCB for the moment, in my opinion you'd be throwing money away.

I'm not suggesting that if something basic doesn't solve this that you will be able to fix the PCB yourself, probably very unlikely, but to get this board sent somewhere and fixed shouldn't be anything like £100, especially given that it has custom chip replacement PCBs with standard logic on them.

I would offer myself but I'm winding down my involvement with the hobby bit by bit and unfortunately that certainly means that I'm no longer taking on repairs for others.

There will be other people that can do it. It is only a Pacman / Ms Pacman board after all. Should be easy, bread and butter stuff to most repairers.

But let's get the easier tests / checks out of the way first
smiley1.gif


Have you confirmed with a meter that you have all the correct voltages present still? Do you know how to check that, and have the tools to do so? And yep, have a look and see if that wire has indeed come off of anywhere on the sync bus controller card.

[EDIT] Don't just blindly connect it to anything though, red usually means voltage!

guddler2012-07-11 13:44:49
 

joel88

Newbie
Credits
5CR
I'm at work currently, so will take a good look once i get home.
Really want to get the thing up and running again, and restore it up.

joel882012-07-11 13:45:24
 

joel88

Newbie
Credits
5CR
Thanks for all the help chaps, glad i cam across this forum now.

I'm not sure on how to check the voltage to be honest, have no means to either. :-(
Bit hopeless really aren't i haha!

If it comes to the stage where i can't fix it (highly probable) - is it best to sweet talk someone on here, or is there a website or something?
 

joel88

Newbie
Credits
5CR
OK, an Update:

Just now i tried attaching the mysterious red wire to two mysterious
soldering lumps:
The boot gets a bit further when i do - it's animated
jumbled characters on the screen, then a white grid, then it gets to the
'Player 1 or 2' screen then reboots into the same cycle. Any ideas what that means? I may be attaching this wire to compleletly wrong place though??

This pic shows where i mean:
http://imageshack.us/photo/my-images/406/redwire.jpg/
 

Muppz

Active member
Feedback
6 (100%)
Credits
362CR
if you don't mind driving up the M1 for a few junctions I can take a look at it for you, I'm away this weekend but weekend after I'll be around.

Chris
 

joel88

Newbie
Credits
5CR
I don't mind driving, that would be great!! Would you just need the board?

However, not sure if the board has had it now - one of the pins on one of the chips has now fallen off - the pin that i attached the red wire to. I dunno, way out my depth here haha
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Nope the board won't have had it as that will just be a standard logic chip that Muppz should have replacements for I should think
smiley1.gif


From the sound of your description, the board is going through it's self tests at boot up and then resetting, looping through that process forever. Not at all unusual on one of these when something goes wrong.

The good news is that's fairly typical of either a ram chip, or maybe a bad interrupt, either of which isn't too bad. So, pop up and see Chris (Muppz) and hopefully he'll be able to sort you out
smiley20.gif
 

Muppz

Active member
Feedback
6 (100%)
Credits
362CR
yeah just the board unless you think there is a problem with the wiring.

As Guddler says most boards can be saved unless they've gone up in flames, its just at what chip replacement count you decide enough is enough
smiley36.gif

Muppz2012-07-12 08:48:58
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
Hi Joel,

Once Muppz fixes your pcb, I have an original fully working Ms Pacman pcb for £135 shipped. You might want it as a backup?
 

joel88

Newbie
Credits
5CR
Alpha1 said:
Hi Joel,

Once Muppz fixes your pcb, I have an original fully working Ms Pacman pcb for £135 shipped. You might want it as a backup?

Maybe if it looks like my board is going to be too much work, then i'll probably contact you again about it!
 

Muppz

Active member
Feedback
6 (100%)
Credits
362CR
guddler said:
The good news is that's fairly typical of either a ram chip,

Bang on the money mate, plus the address decoder the leg had broken off of.

3hrs soak test saw 2 x 74LS08 chips on the vram addresser die to, but its happy again now.

One problem with shoving a pukka Pac or MsPac in that table will be it'll need a rewire, the 18 way on this is nothing like the original
Muppz2012-07-23 13:22:50
 
  • Like
Reactions: trm
Top