So we had another tinker session last weekend.
We now get something on the screen, but it wont display anything other than this:
Adjusting the screen volts, brightness, contrast, cut offs does nothing.
B+ voltage is at 76v. There doesn't seem to be any cold solder joints on the neckboard.
We've replaced:
Vertical IC
HOT 2SC4692 @ Q506
Power MOSFET @ Q901
Diode ESC021 @ D502
Different remote boards
Anyone have any ideas where to look next?
Thanks.
Vamino2021-11-04 22:50:37
We now get something on the screen, but it wont display anything other than this:
Adjusting the screen volts, brightness, contrast, cut offs does nothing.
B+ voltage is at 76v. There doesn't seem to be any cold solder joints on the neckboard.
We've replaced:
Vertical IC
HOT 2SC4692 @ Q506
Power MOSFET @ Q901
Diode ESC021 @ D502
Different remote boards
Anyone have any ideas where to look next?
Thanks.
Vamino2021-11-04 22:50:37