I need to replace the flyback on mtc 900 chassis, the board version 2 because there is a TDA 2653A (pins staggered on one side only) mounted on a "L" shaped heat sink.
From the scheme i saw EHT AT2076/50;
1. Can I use a HR6050? beacause some people said about HR6051
2. Are there difference between AT2076/50 and AT2076/86? both are HR6050 model.
thanks
From the scheme i saw EHT AT2076/50;
1. Can I use a HR6050? beacause some people said about HR6051
2. Are there difference between AT2076/50 and AT2076/86? both are HR6050 model.
thanks