MTC-9000 Remote board Help

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
Hi im trying to figure something out

I have a many remote boards and the Resistor R117 according to the Manual should be a 330R 5% 1/2W

But each of the remote boards I have that resistor R117 is in fact a 180R 5% 1/2W

so what do I use a 330 or a 180 im confused
 

Paul_in_nottingham

Active member
vacBacker
Feedback
1 (100%)
Credits
160CR
I get the impression that the manuals often are incorrect or not representative of final production models.

If all your examples have 180s on them, I'd stick with that..
 
Top