Naomi net dim

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Hi,
I am having issues with some Naomi net dims. I have 3 of them which I need to be working for the weekend as I have bought a NetBoot pi to load games onto my Naomi cab. Problem is-

1 is marked as faulty and shows error 22 on startup,

The other 2 seem dead and won't even let the Naomi mobo boot up. This is strange as 1 was working in my crazy taxi high roller cab the other week.

I have tried all 3 on both Naomi 1 mobo and 2 mobo but with the same results. Am I missing something here?

Please help as I need 2 Naomi cabs working on net dim pi for my meet at the weekend.
Thanks.
Steve
 

Outrun2

Colonel Outrun
Feedback
5 (100%)
Credits
1,182CR
Make sure the dimm board is seated firmly in the slot on the Naomi. Dimm boards are known for poor seating and this usually results in a blank screen. I have de-cased mine and no more problems since.
 

Fantazia2

Active member
vacBacker
Feedback
13 (100%)
Credits
2,246CR
As outrun 2 says they sometimes need a good push down to seat, it can help if you have the correct bolts to bolt them in place and that can help seat it.

Are the voltages ok in the cab your trying, I know the dimms tend to draw more power than the carts.

Also do your Naomis have a firmware that allows net booting, I think its from E upwards but found that on E it will netboot but you dont get the menu to set the IP address

Error 22
Display: COMMUNICATION ERROR OCCURRED BETWEEN MAIN BOARD AND OPTION BOARD.
Cause: The NAOMI main board receives no responses from the DIMM board.
Countermeasures: Correctly reconnect the DIMM board and the GD interface board. This may occur when the daughter board on the DIMM is not properly seated. Fix includes cleaning the contacts and re-seating.

Fantazia22016-03-08 21:29:55
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Thanks for the advice guys. I have de cased one of them and now it boots to error 26 which points me in the direction that I need a chip key in the top of the net dim. If I connect a pi net booster will I still need a chip? Also is there a chip I can fit that will enable me to net boot?
Sorry if these seem silly questions but I am new to net boot stuff.
Thanks again,
Steve
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I think after checking the net I need to adjust the jumpers and I need a zero security key. Where can I get one of those from please?

Thanks
 

robotech

Active member
vacBacker
Feedback
4 (100%)
Credits
823CR
sean28r was selling zero keys recently and I think someone said in a thread on here that you can get them from andy at AGS
if you use naopi to boot games from you raspberry pi you don't need a zero key
 

bbz149

Active member
vacBacker
Feedback
26 (100%)
Credits
1,608CR
Steve said:
Thanks for the advice guys. I have de cased one of them and now it boots to error 26 which points me in the direction that I need a chip key in the top of the net dim. If I connect a pi net booster will I still need a chip? Also is there a chip I can fit that will enable me to net boot?
Sorry if these seem silly questions but I am new to net boot stuff.
Thanks again,
Steve
Chip is in the Box with the Pi m8
smiley20.gif
 

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
Ok brilliant.

Thanks for all the replays guys on this. I was starting to think I had more faulty stuff. Looks it will all be up and running by the weekend.
thanks,
Steve
 
Top