NEED AN ADC0844CCN

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
Hi Steve,

I've not got the T2 schems for reference but assuming the current IC is a DIP thru-hole package (basically not a surface mount) then it looks like the right part. You may be able to find it cheaper on eBay if you're lucky.

Cheers
 

stevebm1

Active member
Feedback
39 (100%)
Credits
1,269CR
t2_gunbrdchp.jpg
,it's the one ive highlighted in red,ive desoldered it from the board and will fit a socket when I replace it,not sure what you mean by dip thru-hole package?
 

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,877CR
That's the one.

DIP - Dual Inline Package (basically two rows of pins)
Thru-hole - its legs protrude through the board and are soldered on the back side. The surface mount stuff aka SMT/SMD rest on the topside of the board and are directly soldered to it rather than having legs that go through holes.

A couple of times I've almost been caught out buying SMD instead of DIP thru-hole as it's hidden away as one entry on the datasheet.

How did you determine the ADC was knacked? I know we have a few T2 owners here so anything you can add to the thread for a future searcher would be cool thanks.

Cheers
 

stevebm1

Active member
Feedback
39 (100%)
Credits
1,269CR
well i sourced a new one for £4 from ebay,plugged it in and still no joy
smiley19.gif
,my pot values still won't change in callibration mode,I tried a multimeter on the pots and the voltage changes,so i know it's not them,I may look at changing the u1 chip on the gun board as well now,if I can source one cheap,really want to be able to play this game
 
Top