Need some help recreating a sticker

[Spanky]

I need someone with l33t skillz to recreate this, please. I've got a 4MB .PNG file if that helps. Also, not sure where to get low volumes stickers made. Perhaps just get 'm printed and stick 'm on with Spray Mount.

 

[Mikonos11]

So easy!

What measures and from what cabinet is?

Cheers!

 

[Mikonos11]

I just checked that it is from Sega Rally 2 and F-Zero AX, for example!

 

[Mikonos11]

"Safety Sticker 440-WS0220UK" (SEGA) arcade file restorer by Mikonos.

I fixed several things on this sticker: 1. The die was completely off. 2. The hazard sign frame was out of sync with the yellow ink.

Cheers!

 

[Spanky]

Oh, thank you very much! This is from a UK Outrun 2. It measures 6cm x 6cm.

 

[Mikonos11]

Perfect!

How many units do you need? They will be ready next Tuesday!

Write me here:

midasororey@yahoo.es

Cheers!

 

[FinalFight]

was cleaning up a few weeks back and came across this sticker between manuals (it's in bad shape)
I thought it was from one of the pinball machines I had 😆

 

[Hurray Banana]

Looks like a snooker or pool sign

 

[Mikonos11]

According to several manuals, this sticker is called "WARNING STICKER TRAP HAZARD." On some arcade cabinets, it's located behind the seat, and on others, it's located below the junction between two Cockpit Twin arcade cabinets.

Cheers!

 

[Mikonos11]

"Trap Hazard Warning sticker 440-WS0220UK" (SEGA)" reproduction printed on coated adhesive polyester and precut (photo 1).

"Trap Hazard Warning sticker 440-WS0220UK" (SEGA)" reproduction printed on coated adhesive polyester and precut (photo 2).