Newbie Question regarding Electronics

philiphunter

Newbie
Credits
11CR
Is there a particular book that you would recommend for a complete novice interested in beginning a hobby in electronics, with the potential of being able to work on arcade PCBs in the future?
 

69er

Active member
Feedback
6 (100%)
Credits
1,844CR
one i recommend and not expensive at around a fiver is ELECTRONICS by George H Olsen

ISBN 0-434-98533-3 ... its just starting to get a bit dated but is from basic A/C and rectifying to DC to explaining a few digital circuits in approx 300 pages which are quite digestible for the beginner

i had it when i first got my city and guilds qualifications back in the 80's and fair enough microprocessors have come a long way since then but you still need a good basic starting block

the back cover says ideal for Alevel and C&G students its approach involves a deliberate progression from treatment of fundamentals and basic devices to their use in complex circuits and assumes no more than a basic knowledge of elementary electricity so would be of interest to anybody wishing to gain an understanding of the principle of electronics

not sure if its still in print or easy to obtain but try amazon as someone may have one on there ?

SADLY THERE IS LITTLE AVAILABLE DIRECT TO THE AMUSEMENT MACHINES INDUSTRY but all electronics teach type books follow the same theories just some do it better than others

i also have loads of other books and also have the full 'COIN SLOT location ' technical course for engineers in the amusement trade from back in the mid eighties too . that explains everything from how to read a resistor colour code to how some ICs work ..... you do benefit here if you have some donor machines and test gear like a good meter and a scope and logic probe to follow some of the detailed stuff ................ but a 3 year course able to be covered in about 10-13 weeks for those eager

to learn how amusement machine faults can be overcome ..........

i often wonder about reproducing it in part on forum but not sure how Clifford Richards may view his copyright? it shows how to use a scope and how a mars 111 works how to solder / desolder to astable and bistable multivibrators in logic circuits which are particularly relevent to collectors now as they refer to 9316 roms used on SI and some monitor issues ie raster scan fault analysis etc shows a great elctroholme x-y schematic and more ...........

hope this is not putting you off learning?

69er2015-06-10 17:44:51
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
Grab a PDF of Atari's "The Book" and go through that. It's fairly easy going for learners and aimed at arcade route operators in the 70's

If you can, buy/borrow a copy of Randy Fromms "Big Blue Book", lot's of useful tidbits in there

Finally, grab PDF's of some of the old Atari manuals from the 70's. They explain a lot of the theory of operation stuff really well, much better than the later manuals.

Dan.

P.S last tip, practice your soldering and desoldering skills as much as possible, and at first do it on some scrap boards
 

69er

Active member
Feedback
6 (100%)
Credits
1,844CR
just to add in the 70's i had a totally opposite occupation unrelated to anything i do now but had an overwhelming desire to find buy and restore a few old pinballs and jukes ...... which i was able to do in the extensive buildings my job supplied me ..... (wish i had that storage now)

in the late 70's i already had a few early 70' fruits and a couple of jukes from the 60's and an odd broken pinball too..... i persevered with trial and error fault finding and by 1977 was operating a few pooltables pinballs and hand op footys in cheshire ...was lucky to acquire a breakout video in 1977 and a midway invader by 1979 ..... built up quite a good hobby side line and got friendly with some arcade owners in wales too

got some cast off machines that way (mostly with minor faults) by 1982 i had 14 video games 12 pinballs and various other coin op stuff in my 'hobby' and made enough to buy a phoenix almost new which i still have...and built a collection of around 50-60 arcade machines rapidly from there... and in 1984 began learning from these publications and a bit of tech night school

by the mid 80s beside my own stuff sited around i began to work for Associated leisure the biggest amusement company at that time ...(they were desperate for people with the right knowledge as videos came widespread and pinballs went electronic and CD jukeboxes emerged on the scene).. deep end motorway service area daily tech engineer .then supporting other lads accross the area in the 100s of pubs they supplied ......... and I stayed with them through the Rank Leisure era until the late 90s but my own business was absorbed into partnership with 2 of my friends one of whom was manufacturing video jamma cabinets and as i only worked 7 days per fortnight i could balance 2 complimenting jobs and eventually that took priority .......still today am part of this tho one friend passed away and the other now does property reovation and letting I AM STILL GOING with the son of the former and the latter is still a good mate he was 65 yesterday so its been a long time obviously and definitely thousands of machines involved

now i still repair arcade machines accross norh wales as a passion ...... and dont find too many problems even as the technology advances ... tho sometimes its a bit tough.. but always think back to the early days and my basic learning often comes to hand .............

never look deeper than you need to and start with the fundanmentals .... do you have power is it getting there via various devices ........ and at the right voltage ..... can you see a visible issue ..... is it something that is self or movement inflicted ( this accounts for up to a quarter of all faults)

good screwdriver good meter good understanding patience and safe approach REMEMBER ELECTRIC IS DANGEROUS ... do what you can with power off first .........

READ RELATED TOPICS ON THESE FORUMS HERE AND JAMMAPLUS etc things like dischaging minitor tubes ... using a meter .......look at other members restoration problems and repairs and take in the knowledge they are giving in their summaries ..ALL VERY GOOD TEACHING in itself .... IT WILL OFTEN LEAD YOU DIRECTLY TO A TYPICAL FAULT which they openly admit they missed through no personal misunderstanding but just because they forgot to do the basics first ..........HANDS ON IS ALWAYS THE BEST WAY TO LEARN ..

69er2015-06-10 18:21:43
 

philiphunter

Newbie
Credits
11CR
Some great advice and information guys, really interesting stuff and I'm looking forward to getting started.

I'll grab a couple of the publications mentioned above and start having a read as well as sorting out a designated work space at home so I can start practice soldering.

My job can be pretty intense, and I'm due to complete my part-time Masters this year, so learning something for me will be a welcome break from the norm
smiley1.gif
.
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
That is a great tale! You should tell more, i bet you have loads of stories we would love to hear.
69er said:
just to add in the 70's i had a totally opposite occupation unrelated to anything i do now but had an overwhelming desire to find buy and restore a few old pinballs and jukes ...... which i was able to do in the extensive buildings my job supplied me ..... (wish i had that storage now)

in the late 70's i already had a few early 70' fruits and a couple of jukes from the 60's and an odd broken pinball too..... i persevered with trial and error fault finding and by 1977 was operating a few pooltables pinballs and hand op footys in cheshire ...was lucky to acquire a breakout video in 1977 and a midway invader by 1979 ..... built up quite a good hobby side line and got friendly with some arcade owners in wales too

got some cast off machines that way (mostly with minor faults) by 1982 i had 14 video games 12 pinballs and various other coin op stuff in my 'hobby' and made enough to buy a phoenix almost new which i still have...and built a collection of around 50-60 arcade machines rapidly from there... and in 1984 began learning from these publications and a bit of tech night school

by the mid 80s beside my own stuff sited around i began to work for Associated leisure the biggest amusement company at that time ...(they were desperate for people with the right knowledge as videos came widespread and pinballs went electronic and CD jukeboxes emerged on the scene).. deep end motorway service area daily tech engineer .then supporting other lads accross the area in the 100s of pubs they supplied ......... and I stayed with them through the Rank Leisure era until the late 90s but my own business was absorbed into partnership with 2 of my friends one of whom was manufacturing video jamma cabinets and as i only worked 7 days per fortnight i could balance 2 complimenting jobs and eventually that took priority .......still today am part of this tho one friend passed away and the other now does property reovation and letting I AM STILL GOING with the son of the former and the latter is still a good mate he was 65 yesterday so its been a long time obviously and definitely thousands of machines involved

now i still repair arcade machines accross norh wales as a passion ...... and dont find too many problems even as the technology advances ... tho sometimes its a bit tough.. but always think back to the early days and my basic learning often comes to hand .............

never look deeper than you need to and start with the fundanmentals .... do you have power is it getting there via various devices ........ and at the right voltage ..... can you see a visible issue ..... is it something that is self or movement inflicted ( this accounts for up to a quarter of all faults)

good screwdriver good meter good understanding patience and safe approach REMEMBER ELECTRIC IS DANGEROUS ... do what you can with power off first .........

READ RELATED TOPICS ON THESE FORUMS HERE AND JAMMAPLUS etc things like dischaging minitor tubes ... using a meter .......look at other members restoration problems and repairs and take in the knowledge they are giving in their summaries ..ALL VERY GOOD TEACHING in itself .... IT WILL OFTEN LEAD YOU DIRECTLY TO A TYPICAL FAULT which they openly admit they missed through no personal misunderstanding but just because they forgot to do the basics first ..........HANDS ON IS ALWAYS THE BEST WAY TO LEARN ..
 
Top