Non Inductive Resistors?

Mitchell Gant

Active member
vacBacker
Feedback
2 (100%)
Credits
888CR
I don't think that would be a non-inductive type, looks like a standard ceramic body with a coiled resistance wire inside, making lots of inductance!

Thick film types like this are non-inductive, but not the same size to fit in a vector deflection board (if that's what it's for
smiley2.gif
)

http://www.ebay.co.uk/itm/VISHAY-SFERNICE-RTO050F10R00JTE1-RES-THICK-FILM-10R-5-50W-TO-220-/321269072532?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item4acd210294
 

tb lilley

5 Star
vacBacker
Feedback
2 (100%)
Credits
1,686CR
Cheers chaps.

Yes, for a 6100 deflection board, so quite a bit larger. Bob Roberts sells them but I loathe the hassle.

There is a resistor already in place, but it's 1 Ohm 24 Watts, rather than the 1.5 Ohm 10 Watt that's specified.

Hmmmm .... I'll have a ponder.
 

adebov

Active member
vacBacker
Feedback
3 (100%)
Credits
168CR
Well they'll probably be OK for audio use (which is what they're categorized as) - especially when they're in a circuit with a much bigger inductor (the speaker) but I really wouldn't recommend in video circuits which actually require zero inductance resistors (rather than low inductance).

If anything; they're probably pretty much the same as the first ones you found, only marketed as "audio grade".
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,675CR
Sorry i just checked all my trays and have non of the above
strange as i had about 4 kits from bob so if he does them i should have them

also checked the removed parts and again have none?

sorry
 

tb lilley

5 Star
vacBacker
Feedback
2 (100%)
Credits
1,686CR
Hey, no worries Phil, thanks for looking. These resistors aren't included in any of the Bob Roberts rebuild kits. Although he does stock them as a separate item.

Anyway, I think I've found the correct part.

Link
 

Equites

Chief Sheesher®
vacBacker
Feedback
35 (100%)
Credits
3,329CR
tb lilley said:
Hey, no worries Phil, thanks for looking. These resistors aren't included in any of the Bob Roberts rebuild kits. Although he does stock them as a separate item.

Anyway, I think I've found the correct part.

Link

If you order from there, grab a few and I will share the costs with you to make it less painful.
 
Top