Original super contra

bonehead

I'll get pix tonight
vacBacker
Feedback
50 (100%)
Credits
1,729CR
I have an original konami super contra board that I cant sort out.
When tested it goes straight into ram test mode, then reports ok and goes into the test hatch screen. I have no test button on my cab. Is there a dip switch I need to turn off?
Checked the settjngs online and can't find a test switch on the pcb.

Can anyone help?

Thanks,
Steve.
 

cmonkey

Active member
vacBacker
Feedback
4 (100%)
Credits
1,659CR
Sounds like it's in service mode. Pressing the 1P start button will advance through each of the screens in service mode. To turn it off flip switch 3 on dipswitch 3.
 

silverfox0786

Beware the Hillman
Feedback
47 (100%)
Credits
2,699CR
looks to me like the test mode point is grounded

happened to me once where I accidently soldered my test button wrong and it was grounded and game booted to test screen

check the traces on the test line and check that its not shorted to ground
 
Top