Pac-Man Freeplay Mod Help

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Question for the veterans of early boards and successful modders.....

I'm trying to mod my Pac-Man board to use Souza's freeplay version - originally wanted to get the one with the high score table on it and then figured that the mod won't work without either an NVRAM board or making up an adaptor to provide it some RAM via some 2114's somehow so I opted to go for the high-score lite with freeplay.

If you don't have the NVRAM attached then it just acts as freeplay - ta-da -one less coin button.

Obtained from here:

http://arcade.souzaonline.com

Here's my board:



I've burned the 6e/6f files to some 2732's and inserted them to the game but ....



smiley6.gif


Wondering what I could be doing wrong. The ROMs verify perfectly fine but the game won't accept them.

There's no mention on Jason's site of using a specific board or specific rom set.

The roms that were on there originally look like original mask roms:



Is there some other hack I need to do? Are the originals encrypted or something?

Anyone else tried this mod and had experience?

If I return the originals back in place, the game boots.

If I try to read the original roms, the first 1k is blank (just FF's)

RGP2014-08-17 15:03:38
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Hmmm, might have figured it out.....

.... rule 1 of rom burning - just because the file size is 2k doesn't mean its a 2k EEPROM you're familiar with - not all eeproms are the same pinout.

I think Pac-Man uses 2532's instead of 2732's -looking at the datasheets, at least 2 pins are out of place A11 and /E, I could build an adaptor but its probably just easier to get 2532's from somewhere and burn those.

Am I on the right track here.
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Well the mod works. I've just tried it on a Pacman romset in Mame, and set the Freeplay mode dipswitch, and you get freeplay with attract, whch is what you are after

It says on the schematic:

Use 2532 Roms @ 6E,6F,6H,6J

Or use 2716 Roms @ 6E-6P
Purity2014-08-17 16:50:33
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
Couple of 2532's later and i've got the freeplay mod installed and working.

Next job is to make a high-score daughter board for it and do the high-score/freeplay mod.

Maybe later i'll do the 4-in-1.

Thanks :)
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
If Jon was coming to do a perfect game attempt we'd change the board back or put another in, same for anyone who wanted to do an actual attempt.

I'll be keeping the original ROMs around so won't be a problem to put them back.

How original is original? Some boards in some machines had mask roms, some had eeproms - what you gonna do TG? Carbon date the stickers?

Lets not get started on TG though.
 
Top