I've just received a working Pacman pcb to replace a non-working one in an original Midway cabinet. Before I plug the working board in, I wanted to check that the AC input voltages aren't going to damage the board. When I measure them with the non-working board they are 8.4V (manual says 7V) and 13.7 (manual says 12V).
Are those voltages within tolerance? I measured the voltage across one of the RAMs on the board and it was 4.9V which seems ok? Just don't want to fry my working board!
Cheers!
Are those voltages within tolerance? I measured the voltage across one of the RAMs on the board and it was 4.9V which seems ok? Just don't want to fry my working board!
Cheers!