PCB advice

s18dav

Active member
Feedback
1 (100%)
Credits
29CR
Hi

I have a generic jamma cab and a few pcb's which work great with it, my question is

i have no choice but to lay the pcb down on a wooden shelf in the back of the cab so is it

safe to lay the pcb on a thin foam bedding when turned on etc or is it a fire risk, do these

things get hot ???

I have no room for side mounting the boards like ive seen some done ???

Any ideas appreciated

Thanks
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Buy some PCB feet off Ebay to elevate the PCB from the surface, they're usually not that much. I wouldn't put the PCB on foam to be honest, wood is a reasonably good surface on it's own and won't damage the PCB if it is just sitting there on it. Placing the PCB on foam isn't great because foam is a good heat insulator and will typically overheat the PCB in contact with it. It's all a matter of minimising problems but you can't eliminate them altogether.

Just my ideas.
 

s18dav

Active member
Feedback
1 (100%)
Credits
29CR
Excellent John thanks for that i will get some pcb feet makes sense
Arcade newbie as you probably guessed
smiley36.gif


Thankyou

Steve
 
Top